English
  1. Home
  2. Catalogue

Catalogue

Loading
Filter
Delete filter
Tool material
Tool material: HSS
Tool material: SC
Tool material: HSSE-PM
Tool material: HSS Co5
Tool material: HSS Co8
Tool material: HSSE
Tool material: HSSE V3
Tool material: HSS - M51
Tool material: HSS - M42
Machined material
Machined material: P.1 | Free-cutting steels, general construction steels
Machined material: P.2 | General construction steels, steel castings
Machined material: P.3 | Tool steels low alloyed
Machined material: P.4 | Heat treatable steels
Machined material: P.5 | Tool steels high alloyed
Machined material: P.6 | Tool and treated steels
Machined material: M.1 | Corrosion- and acid-proof steels
Machined material: M.2 | Corrosion- and acid-proof steels
Machined material: M.3 | Corrosion- and acid-proof steels
Machined material: K.1 | Cast iron (≤ 240 HB)
Machined material: K.2 | Cast iron (> 240 HB)
Machined material: N.1 | Aluminium, Aluminium cast alloys Si (Si ≤ 6%)
Machined material: N.2 | Aluminium cast alloys Si (Si ≤ 12%)
Machined material: N.3 | Aluminium cast alloys Si (Si > 12%)
Machined material: N.4 | Cooper-zinc alloys, cooper-tin alloys
Machined material: N.5 | Plastics
Machined material: S.1 | Chrome-nickel alloys
Machined material: S.2 | Titanium, Titanium alloys
Machined material: H.1 | Hardened materials (< 54 HRC)
Machined material: H.2 | Hardened materials (54 - 60 HRC)
Required operation
Required operation: Square Shoulder Milling
Required operation: Roughing milling into the corner
Required operation: Face Milling
Required operation: Copy Milling
Required operation: Slot Milling
Required operation: Milling of pen grooves
Required operation: woodruff keyseat milling
Required operation: T-slot milling
Required operation: Dovetail milling
Required operation: Inverted dovetail milling
Required operation: Trochoidal milling
Required operation: Bevel milling
Required operation: Milling of angular grooves
Required operation: Radius groove milling
Required operation: Convex milling
Required operation: Concave milling
Required operation: Evolvent milling
Required operation: Drilling
Required operation: Manual drilling
Required operation: Countersinking
Required operation: Sawing
Required operation: Deburring
Required operation: Manual deburring
Required operation: Inner threading
Required operation: Outer threading
Tool clamping
Tool clamping: Straight bore with standard keyway and driving slot
Tool clamping: Morse taper shank acc. to DIN 2207
Tool clamping: Morse taper shank acc. to DIN 228 A
Tool clamping: Straight shank with clamping flat (Weldon) acc. to DIN 1835 B
Tool clamping: Plain straight shank acc. to DIN 1835 A
Tool clamping: Straight shank with clamping flat (Weldon) acc. to DIN 6535 HB
Tool clamping: Plain straight shank acc. to DIN 6535 HA
Surface treatment
Surface treatment: TiAlN
Surface treatment: AlTiN
Surface treatment: AlCrN
Surface treatment: AlCr
Surface treatment: CrN
Surface treatment: ZrN
Surface treatment: TiN
Surface treatment: TiCN
Surface treatment: ta-C
Surface treatment: Pasivation (PAS)
Surface treatment: Polishing
Tool type
Tool type: Type N
Tool type: Type NR
Tool type: Type NR-F
Tool type: Type H
Tool type: Type HR
Tool type: Type HR-F
Tool type: Type W
Tool type: Type WR
Tool type: Type CB
Tool type: Type T
Tool type: Type T100
Tool type: Type Ti
Tool type: Type WN
Tool type: Type VA
Tool type: Type UNI
Tool type: Type V120
Tool type: Type MX
Tool type: Type MY
Working length of the drill
Working length of the drill: The working length of drill 25xD
Working length of the drill: The working length of drill 20xD
Working length of the drill: The working length of drill 15xD
Working length of the drill: The working length of drill 12xD
Working length of the drill: The working length of drill 10xD
Working length of the drill: The working length of drill 8xD
Working length of the drill: The working length of drill 5xD
Working length of the drill: The working length of drill 3xD
Drill tip shape
Drill tip shape: Form A
Drill tip shape: Form C
Drill tip shape: Form E
Drill tip shape: Form N
Drill tip angle
Drill tip angle: Point angle 140°
Drill tip angle: Point angle 135°
Drill tip angle: Point angle 130°
Drill tip angle: Point angle 128°
Drill tip angle: Point angle 120°
Drill tip angle: Point angle 118°
Drill tip angle: Point angle 90°
Thread type
Thread type: Metric thread
Thread type: Fine metric thread
Close filter
HSS milling cutters
HSS milling cutters
SC milling cutters
SC milling cutters
Form cutters
Form cutters
MK Cutters
MK Cutters
Shell end mills
Shell end mills
Side and face cutters
Side and face cutters
Angular and radius cutters
Angular and radius cutters
Rotary burrs
Rotary burrs
Saws
Saws
Drills
Drills
Thread cutting tools
Thread cutting tools
Dárkové poukazy
Dárkové poukazy
Category: New
Category: Sale
Category: Aluminium
Category: Sets
Filter
End mills short for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank
114418

End mills short for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank
End mills long for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank
115418

End mills long for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank
End mills short, 1 tooth cut over centre, 30°, type W, plain shank
100405

End mills short, 1 tooth cut over centre, 30°, type W, plain shank
End mills short, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN
100405 ZrN

End mills short, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN
Set of end mills short, 1 tooth cut over centre, 30°, type W, plain shank
100405 SET

Set of end mills short, 1 tooth cut over centre, 30°, type W, plain shank
End mills long, 1 tooth cut over centre, 30°, type W, plain shank
101405

End mills long, 1 tooth cut over centre, 30°, type W, plain shank
End mills long, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN
101405 ZrN

End mills long, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN
Slot drills short, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank
270618

Slot drills short, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank
Slot drills long, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank
273618

Slot drills long, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank
End mills short, 1 tooth cut over centre, 40°, type W, Weldon shank
110418

End mills short, 1 tooth cut over centre, 40°, type W, Weldon shank
End mills long, 1 tooth cut over centre, 40°, type W, Weldon shank
111418

End mills long, 1 tooth cut over centre, 40°, type W, Weldon shank
End mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank
104418P

End mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank
Set of end mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank
104418P SET

Set of end mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank
End mills long, 1 tooth cut over centre, 35°, type NR-F, Weldon shank
105418P

End mills long, 1 tooth cut over centre, 35°, type NR-F, Weldon shank
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN
124517

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN
125517

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank
124518

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN
124518 TiAlN

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN
End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank
125518

End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank
End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN
125518 TiAlN

End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN
End mills short, 1 tooth cut over centre, 30°, type NR-F, Weldon shank
124518P

End mills short, 1 tooth cut over centre, 30°, type NR-F, Weldon shank
End mills long, 1 tooth cut over centre, 30°, type NR-F, Weldon shank
125518P

End mills long, 1 tooth cut over centre, 30°, type NR-F, Weldon shank
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN
128517

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN
End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN
129517

End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN
128517X

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN
End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank, coating AlTiN
128517P

End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank, coating AlTiN
End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank
128518S

End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank
End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN
128518S TiAlN

End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank
128518

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN
128518 TiAlN

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN
End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank
129518

End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank
End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN
129518 TiAlN

End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN
End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank
128518P

End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank
End mills long, 1 tooth cut over centre, 30°, type HR-F, Weldon shank
129518P

End mills long, 1 tooth cut over centre, 30°, type HR-F, Weldon shank
End mils extra long, type NR, 30°, Weldon shank
125215E

End mils extra long, type NR, 30°, Weldon shank
End mils extra long, type N, 30°, Weldon shank
121215E

End mils extra long, type N, 30°, Weldon shank
End mills extra short, type NR, 30°, Weldon shank
124218K

End mills extra short, type NR, 30°, Weldon shank
End mills extra short, type N, 30°, Weldon shank
120218K

End mills extra short, type N, 30°, Weldon shank
End mills short, 1 tooth cut over centre, 45°, type HR, Weldon shank, coating AlTiN
148617

End mills short, 1 tooth cut over centre, 45°, type HR, Weldon shank, coating AlTiN
End mills with corner radius, type HR, 45°, Weldon shank, coating AlTiN
148517R

End mills with corner radius, type HR, 45°, Weldon shank, coating AlTiN
End mills with corner radius, 30°, type N, Weldon shank, coating AlTiN
120517R

End mills with corner radius, 30°, type N, Weldon shank, coating AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN
120417

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN
120517

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN
121517

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank
140418

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN
140418 TiAlN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN
End mills with variable helix angle, 38°-42°, type N, Weldon shank, coating AlTiN
140617X

End mills with variable helix angle, 38°-42°, type N, Weldon shank, coating AlTiN
End mills for stainless steel, 50°, type N, Weldon shank, coating AlTiN
150617S

End mills for stainless steel, 50°, type N, Weldon shank, coating AlTiN
End mills for stainless steel, 50°, type N, Weldon shank, coating AlCrN
150617S AlCrN

End mills for stainless steel, 50°, type N, Weldon shank, coating AlCrN
End mills short, 1 tooth cut over centre, 30°, type N, plain shank
120508

End mills short, 1 tooth cut over centre, 30°, type N, plain shank
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank
120518

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN
120518 TiAlN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN
Set of end mills short, 1 tooth cut over centre, type N
120518 SET

Set of end mills short, 1 tooth cut over centre, type N
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank
121518

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN
121518 TiAlN

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN
End mills short, 40°, type N, plain shank
140208

End mills short, 40°, type N, plain shank
End mills short, 40°/35°, type N, Weldon shank
140218

End mills short, 40°/35°, type N, Weldon shank
Set of end mills short, 40°, type N, Weldon shank
140218 SET

Set of end mills short, 40°, type N, Weldon shank
End mills long, 40°, type N, plain shank
141208

End mills long, 40°, type N, plain shank
End mills long, 40°/35°, type N, Weldon shank
141218

End mills long, 40°/35°, type N, Weldon shank
End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank
140618

End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank
End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN
140618 TiAlN

End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN
Set of end mills short, 2 teeth cut to centre, 40°, type N, Weldon shank
140618 SET

Set of end mills short, 2 teeth cut to centre, 40°, type N, Weldon shank
End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank
141618

End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank
End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN
141618 TiAlN

End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN
Mini end mills short, 30°, type N, Weldon shank
160418

Mini end mills short, 30°, type N, Weldon shank
Mini end mills short, 30°, type N, Weldon shank, coating TiAlN
160418 TiAlN

Mini end mills short, 30°, type N, Weldon shank, coating TiAlN
Mini end mills long, 30°, type N, Weldon shank
161418

Mini end mills long, 30°, type N, Weldon shank
Mini end mills long, 30°, type N, Weldon shank, coating TiAlN
161418 TiAlN

Mini end mills long, 30°, type N, Weldon shank, coating TiAlN
Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating AlTiN
220417

Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating AlTiN
Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating AlTiN
230417

Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating AlTiN
Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank
220408

Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank
Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank, coating TiAlN
220408 TiAlN

Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank, coating TiAlN
Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank
220418

Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank
Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN
220418 TiAlN

Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN
Set of slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank
220418 SET

Set of slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank
Slot drills long, 2-fluted, centre cutting, 25°, type N, plain shank
221408

Slot drills long, 2-fluted, centre cutting, 25°, type N, plain shank
Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank
221418

Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank
Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN
221418 TiAlN

Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN
Set of slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank
221418 SET

Set of slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank
Slot drills short, 3-fluted, centre cutting, 25°, type N, Weldon shank
230418

Slot drills short, 3-fluted, centre cutting, 25°, type N, Weldon shank
Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN
230418 TiAlN

Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN
Slot drills short, 3-fluted centre cutting, 30°, type N, Weldon shank
230418H

Slot drills short, 3-fluted centre cutting, 30°, type N, Weldon shank
Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank
231418

Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank
Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN
231418 TiAlN

Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN
Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank
233418

Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank
Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN
233418 TiAlN

Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN
Ball nose end mills short, 2-fluted, 25°, Weldon shank, coating AlTiN
510417

Ball nose end mills short, 2-fluted, 25°, Weldon shank, coating AlTiN
Ball nose end mills short, 2-fluted, 25°, Weldon shank
510418

Ball nose end mills short, 2-fluted, 25°, Weldon shank
Set of ballnose end mills, 2-fluted
510418 SET

Set of ballnose end mills, 2-fluted
Ball nose end mills long, 2-fluted, 25°, Weldon shank
511418

Ball nose end mills long, 2-fluted, 25°, Weldon shank
Ball nose end mills short, semicircular teeth, Weldon shank
530718

Ball nose end mills short, semicircular teeth, Weldon shank
Ball nose end mills long, semicircular teeth, Weldon shank
531718

Ball nose end mills long, semicircular teeth, Weldon shank
Die sinking cutters tapered, 4-fluted, 25°, Weldon shank
580718

Die sinking cutters tapered, 4-fluted, 25°, Weldon shank
2023 © ZPS-FN a.s. | All right reserved
webdesign by Studio 9