End mills long, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN
| D k 12 | d h 6 | l1 | l2 | l3 | Z | Item code | On stock |
|---|---|---|---|---|---|---|---|
| 3,2 | 8 | 80 | 10 | 38 | 1 | 101405.032080 ZrN | Yes |
| 4 | 8 | 80 | 16 | 45 | 1 | 101405.040 ZrN | Yes |
| 4,2 | 8 | 80 | 10 | 37 | 1 | 101405.042080 ZrN | No |
| 5 | 8 | 80 | 16 | 45 | 1 | 101405.050 ZrN | Yes |
| 5 | 8 | 80 | 14 | 36 | 1 | 101405.050080 ZrN | Yes |
| 5 | 8 | 120 | 16 | 84 | 1 | 101405.050120 ZrN | Yes |
| 6 | 8 | 90 | 16 | 45 | 1 | 101405.060 ZrN | Yes |
| 6 | 8 | 80 | 14 | 37 | 1 | 101405.060080 ZrN | No |
| 8 | 8 | 80 | 14 | 55 | 1 | 101405.080080 ZrN | Yes |
| 8 | 8 | 100 | 30 | 70 | 1 | 101405.080100 ZrN | Yes |
| 8 | 8 | 120 | 16 | 90 | 1 | 101405.080120 ZrN | Yes |
| 10 | 10 | 80 | 14 | 60 | 1 | 101405.10010 ZrN | Yes |
Cutting conditions
Material | Strength | Ap | Ae | Vc | fz(mm/z) Ø 3 | Ø 4 | Ø 5 | Ø 6 | Ø 8 | Ø 10 |
|---|---|---|---|---|---|---|---|---|---|---|
| N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1,5xD | 0,5xD | 160-260 | 0.0056 | 0.008 | 0.01 | 0.0126 | 0.0168 | 0.021 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 1835 A.
For machining of soft materials, for example aluminium and non-ferrous metals.
Feed direction possibility
Coating with high corrosion resistance and high hardness with low coefficitent of friction. Ideal for machining aluminum alloys, cupper alloys or plastics.