End mills long, 1 tooth cut over centre, 30°, type W, plain shank
D
k 12 |
d
h 6 | l1 | l2 | l3 | Z | Item code | On stock |
---|---|---|---|---|---|---|---|
3,2 | 8 | 80 | 10 | 38 | 1 | 101405.032080 | Yes |
4 | 8 | 80 | 16 | 45 | 1 | 101405.040 | Yes |
4,2 | 8 | 80 | 10 | 37 | 1 | 101405.042080 | Yes |
5 | 8 | 80 | 16 | 45 | 1 | 101405.050 | Yes |
5 | 8 | 80 | 14 | 36 | 1 | 101405.050080 | Yes |
5 | 8 | 120 | 16 | 84 | 1 | 101405.050120 | Yes |
6 | 8 | 90 | 16 | 45 | 1 | 101405.060 | Yes |
6 | 8 | 80 | 14 | 37 | 1 | 101405.060080 | Yes |
8 | 8 | 80 | 14 | 55 | 1 | 101405.080080 | Yes |
8 | 8 | 100 | 30 | 70 | 1 | 101405.080100 | Yes |
8 | 8 | 120 | 16 | 84 | 1 | 101405.080120 | Yes |
10 | 10 | 80 | 14 | 60 | 1 | 101405.10010 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 4 |
Ø 5 |
Ø 6 |
Ø 8 |
Ø 10 |
---|---|---|---|---|---|---|---|---|---|---|
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1,5xD | 0,5xD | 160-260 | 0.0056 | 0.008 | 0.01 | 0.0126 | 0.0168 | 0.021 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 1835 A.
For machining of soft materials, for example aluminium and non-ferrous metals.
