End mills long, 1 tooth cut over centre, 40°, type W, Weldon shank
D
k 10 |
d
h 6 | l1 | l2 | Z | Item code | On stock |
---|---|---|---|---|---|---|
6 | 6 | 68 | 24 | 3 | 111418.060 | Yes |
7 | 10 | 80 | 30 | 3 | 111418.070 | Yes |
8 | 10 | 88 | 38 | 3 | 111418.080 | Yes |
9 | 10 | 88 | 38 | 3 | 111418.090 | Yes |
10 | 10 | 95 | 45 | 3 | 111418.100 | Yes |
11 | 12 | 102 | 45 | 3 | 111418.110 | Yes |
12 | 12 | 110 | 53 | 3 | 111418.120 | Yes |
14 | 12 | 110 | 53 | 3 | 111418.140 | Yes |
15 | 12 | 110 | 53 | 3 | 111418.150 | Yes |
16 | 16 | 123 | 63 | 3 | 111418.160 | Yes |
18 | 16 | 123 | 63 | 3 | 111418.180 | Yes |
20 | 20 | 141 | 75 | 3 | 111418.200 | Yes |
25 | 25 | 166 | 90 | 3 | 111418.250 | Yes |
30 | 25 | 166 | 90 | 3 | 111418.300 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 18 |
Ø 20 |
Ø 25 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 1xD | 0,1xD | 45 | 0.015 | 0.021 | 0.028 | 0.034 | 0.044 | 0.051 | 0.057 | 0.071 |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1xD | 0,1xD | 160-300 | 0.0195 | 0.0273 | 0.0364 | 0.0442 | 0.0572 | 0.0663 | 0.0741 | 0.092 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Tool geometry
more +Helix angle = 40°.
Rake angle = 25°.
Material HSS Co8
more +Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.
Type W
more +For machining of soft materials, for example aluminium and non-ferrous metals.