124417 AlTiN High-speed steel HSSE-PM DIN 844K
Clamping element
Type NR
Tool geometry
Feed direction possibility
Material HSSE-PM
Coating AlTiN
D
k 12
d
h 6
l1 l2 Z Item code On stock
6 6 57 13 3 124417.060 ALTIN Yes
8 10 69 19 3 124417.080 ALTIN Yes
10 10 72 22 3 124417.100 ALTIN Yes
12 12 83 26 3 124417.120 ALTIN Yes
14 12 83 26 3 124417.140 ALTIN Yes
16 16 92 32 3 124417.160 ALTIN Yes
18 16 92 32 3 124417.180 ALTIN Yes
20 20 104 38 3 124417.200 ALTIN No

Cutting conditions


Material

Strenght

Ap

Ae

Vc
fz(mm/z)
Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1,5xD 0,5xD 114 0.022 0.028 0.039 0.044 0.077 0.088 0.1
P.2 | General construction steels, steel castings ≤ 850 N/mm² 1,5xD 0,5xD 99 0.022 0.028 0.039 0.044 0.077 0.088 0.1
P.4 | Heat treatable steels ≤ 900 N/mm² 1,5xD 0,5xD 76.5 0.022 0.028 0.039 0.044 0.077 0.088 0.1
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1,5xD 0,5xD 37.5 0.022 0.028 0.039 0.044 0.077 0.088 0.1
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 1,5xD 0,5xD 88.5 0.022 0.028 0.039 0.044 0.077 0.088 0.1

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Tool geometry

Tool geometry

more +
Helix angle = 30°. Rake angle = 12°.
Material HSSE-PM

Material HSSE-PM

more +
Extra high performance high speed steel produced by powder metallurgy. It has a homogeneous structure resulting in higher dimension stability and longer tool life. It is applicable for machining of materials with very high strength and materials hard to machine, such as Titanium and its alloys. The milling cutters made from this material are delivered with AlTiN coating as a standard.
Type NR

Type NR

more +
For roughing operation and materials of lower and medium strength (up to 700 MPa), surface roughness Ra 12,5 and more.
Feed direction possibility

Feed direction possibility

Coating AlTiN

Coating AlTiN

more +
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.