End mills short, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN
|
D
k 12 |
d
h 6 | l1 | l2 | Z | Item code | On stock |
|---|---|---|---|---|---|---|
| 3 | 8 | 60 | 10 | 1 | 100405.030 ZrN | Yes |
| 4 | 8 | 60 | 12 | 1 | 100405.040 ZrN | Yes |
| 5 | 8 | 60 | 14 | 1 | 100405.050 ZrN | Yes |
| 6 | 8 | 60 | 14 | 1 | 100405.060 ZrN | Yes |
| 7 | 8 | 60 | 14 | 1 | 100405.070 ZrN | No |
| 8 | 8 | 80 | 14 | 1 | 100405.080 ZrN | Yes |
| 9 | 8 | 80 | 14 | 1 | 100405.090 ZrN | Yes |
| 10 | 8 | 80 | 14 | 1 | 100405.100 ZrN | Yes |
| 12 | 8 | 80 | 14 | 1 | 100405.120 ZrN | No |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
|---|---|---|---|---|---|---|---|---|---|
| N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1,5xD | 0,5xD | 160-260 | 0.008 | 0.018 | 0.024 | 0.03 | 0.033 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 1835 A.
For machining of soft materials, for example aluminium and non-ferrous metals.
Feed direction possibility
Coating with high corrosion resistance and high hardness with low coefficitent of friction. Ideal for machining aluminum alloys, cupper alloys or plastics.