Frézy valcové čelné dlhé, 2 zuby do stredu, 40°, typ N, plôška Weldon
|
D
k 10 |
d
h 6 | l1 | l2 | Z | Kód produktu | Cena/ks | Na sklade | Počet ks | |
|---|---|---|---|---|---|---|---|---|---|
| 2 | 6 | 54 | 10 | 3 | 141618.020 | 13,75 € 11,36 € | Nie |
|
|
| 2,5 | 6 | 56 | 3 | 141618.025 | 13,75 € 11,36 € | Nie |
|
||
| 3 | 6 | 56 | 12 | 4 | 141618.030 | 13,75 € 11,36 € | Áno |
|
|
| 3,5 | 6 | 59 | 15 | 4 | 141618.035 | 14,90 € 12,31 € | Nie |
|
|
| 4 | 6 | 63 | 19 | 4 | 141618.040 | 13,75 € 11,36 € | Áno |
|
|
| 4,5 | 6 | 63 | 19 | 4 | 141618.045 | 18,50 € 15,29 € | Nie |
|
|
| 5 | 6 | 68 | 24 | 4 | 141618.050 | 15,65 € 12,93 € | Áno |
|
|
| 5,5 | 6 | 58 | 24 | 4 | 141618.055 | 22,51 € 18,60 € | Nie |
|
|
| 6 | 6 | 68 | 24 | 4 | 141618.060 | 16,15 € 13,35 € | Áno |
|
|
| 6,5 | 10 | 80 | 30 | 4 | 141618.065 | 24,41 € 20,17 € | Nie |
|
|
| 7 | 10 | 80 | 30 | 4 | 141618.070 | 19,05 € 15,74 € | Áno |
|
|
| 7,5 | 10 | 80 | 30 | 4 | 141618.075 | 25,75 € 21,28 € | Nie |
|
|
| 8 | 10 | 88 | 38 | 4 | 141618.080 | 20,00 € 16,53 € | Áno |
|
|
| 8,5 | 10 | 88 | 38 | 4 | 141618.085 | 26,50 € 21,90 € | Nie |
|
|
| 9 | 10 | 88 | 38 | 4 | 141618.090 | 23,45 € 19,38 € | Áno |
|
|
| 9,5 | 10 | 88 | 38 | 4 | 141618.095 | 26,50 € 21,90 € | Nie |
|
|
| 10 | 10 | 95 | 45 | 4 | 141618.100 | 23,45 € 19,38 € | Áno |
|
|
| 11 | 12 | 102 | 45 | 4 | 141618.110 | 28,50 € 23,55 € | Nie |
|
|
| 12 | 12 | 110 | 53 | 4 | 141618.120 | 28,35 € 23,43 € | Áno |
|
|
| 13 | 12 | 110 | 53 | 4 | 141618.130 | 34,00 € 28,10 € | Nie |
|
|
| 14 | 12 | 110 | 53 | 4 | 141618.140 | 32,80 € 27,11 € | Áno |
|
|
| 15 | 12 | 110 | 53 | 4 | 141618.150 | 39,49 € 32,64 € | Áno |
|
|
| 16 | 16 | 123 | 63 | 4 | 141618.160 | 39,10 € 32,31 € | Áno |
|
|
| 17 | 16 | 123 | 63 | 4 | 141618.170 | 56,25 € 46,49 € | Nie |
|
|
| 18 | 16 | 123 | 63 | 4 | 141618.180 | 55,41 € 45,79 € | Áno |
|
|
| 19 | 16 | 123 | 63 | 4 | 141618.190 | 67,30 € 55,62 € | Nie |
|
|
| 20 | 20 | 141 | 75 | 4 | 141618.200 | 59,25 € 48,97 € | Áno |
|
|
| 22 | 20 | 141 | 75 | 4 | 141618.220 | 83,45 € 68,97 € | Áno |
|
|
| 24 | 25 | 166 | 90 | 5 | 141618.240 | 95,20 € 78,68 € | Áno |
|
|
| 25 | 25 | 166 | 90 | 5 | 141618.250 | 97,85 € 80,87 € | Áno |
|
|
| 28 | 25 | 166 | 90 | 5 | 141618.280 | 110,50 € 91,32 € | Áno |
|
|
| 30 | 25 | 166 | 90 | 5 | 141618.300 | 124,35 € 102,77 € | Áno |
|
|
| 32 | 32 | 186 | 106 | 6 | 141618.320 | 160,35 € 132,52 € | Áno |
|
Podmienky rezania
Materiál |
Pevnost |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 18 |
Ø 20 |
Ø 25 |
Ø 32 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Automatové a konstrukční oceli | ≤ 600 N/mm² | 1,5xD | 0,1xD | 45 | 0.0048 | 0.012 | 0.0168 | 0.0224 | 0.0272 | 0.0352 | 0.0408 | 0.0456 | 0.0568 | 0.0728 |
| P.2 | Konstrukční a lité oceli | ≤ 850 N/mm² | 1,5xD | 0,1xD | 39 | 0.0048 | 0.012 | 0.0168 | 0.0224 | 0.0272 | 0.0352 | 0.0408 | 0.0456 | 0.0568 | 0.0728 |
| P.3 | Nástrojové oceli nízkolegované | ≤ 1100 N/mm² | 1,5xD | 0,1xD | 24 | 0.0048 | 0.012 | 0.0168 | 0.0224 | 0.0272 | 0.0352 | 0.0408 | 0.0456 | 0.0568 | 0.0728 |
| P.4 | Zušlechtěné oceli | ≤ 900 N/mm² | 1,5xD | 0,1xD | 30 | 0.0048 | 0.012 | 0.0168 | 0.0224 | 0.0272 | 0.0352 | 0.0408 | 0.0456 | 0.0568 | 0.0728 |
| P.5 | Nástrojové oceli vysocelegované | ≤ 1100 N/mm² | 1,5xD | 0,1xD | 24 | 0.0048 | 0.012 | 0.0168 | 0.0224 | 0.0272 | 0.0352 | 0.0408 | 0.0456 | 0.0568 | 0.0728 |
| K.1 | Litina (≤ 240 HB) | ≤ 820 N/mm² | 1,5xD | 0,1xD | 35 | 0.0048 | 0.012 | 0.0168 | 0.0224 | 0.0272 | 0.0352 | 0.0408 | 0.0456 | 0.0568 | 0.0728 |
| N.4 | Měď, slitiny mědi, mosaz, bronz | ≤ 800 N/mm² | 1,5xD | 0,1xD | 80-120 | 0.0048 | 0.012 | 0.0168 | 0.0224 | 0.0272 | 0.0352 | 0.0408 | 0.0456 | 0.0568 | 0.0728 |
| S.1 | Slitiny Cr-Ni | ≤ 1500 N/mm² | 1,5xD | 0,1xD | 12 | 0.00336 | 0.0084 | 0.01176 | 0.01568 | 0.01904 | 0.02464 | 0.02856 | 0.03192 | 0.03976 | 0.05096 |
Výpočty řezných podmínek
Vlastnosti produktu
Valcová stopka s plochou (Weldon) podľa DIN 1835 B.
Uhol špirály = 40°, uhol čela = 12°.
Vysoko výkonná oceľ s dobrou húževnatosťou a vynikajúcou teplotnou odolnosťou. Vhodné najmä na frézovanie vysokopevných materiálov, austenitických ocelí, ocelí na tvárnenie za tepla atď.
Univerzálne použitie. Vhodné pre materiály do 900 MPa.
