C160402.045 Solid carbide (SC)
Clamping element
Company norm
Type N
Tool geometry
Feed direction possibility
End face design
Oil coolant.
Solid carbide
D
h 10
d
h 6
l1 l2 Z Item code On stock
4,5 6 40 8 3 C160402.045 No

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 3

Ø 6

Ø 8

Ø 10

Ø 12
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 0,5xD 0,1xD 140 0.011 0.021 0.028 0.035 0.042
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 0,5xD 0,1xD 85 0.011 0.021 0.028 0.035 0.042
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 0,5xD 0,1xD 65 0.011 0.021 0.028 0.035 0.042
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 0,5xD 0,1xD 70 0.011 0.021 0.028 0.035 0.042
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 0,5xD 0,1xD 60 0.011 0.021 0.028 0.035 0.042
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 0,5xD 0,1xD 105 0.011 0.021 0.028 0.035 0.042
K.2 | Cast iron (> 240 HB) > 800 N/mm² 0,5xD 0,1xD 85 0.011 0.021 0.028 0.035 0.042
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 0,5xD 0,1xD 45 0.011 0.021 0.028 0.035 0.042
S.2 | Titanium, Titanium alloys ≤ 1250 N/mm² 0,5xD 0,1xD 55 0.011 0.021 0.028 0.035 0.042

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Plain straight shank according to DIN 6535 HA.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

Oil coolant.

Oil coolant.

Company norm

Company norm

Tool geometry

Tool geometry

more +
Helix angle = 30°. Rake angle = 12°.
End face design

End face design

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.