510418.300 High-speed steel HSS Co8 ~DIN 1889
Clamping element
Tool geometry
Feed direction possibility
Material HSS Co8
R D
h 10
d
h 6
l1 l2 Z Item code On stock
15 30 25 102 26 2 510418.300 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.2 | General construction steels, steel castings ≤ 850 N/mm² 0,5xD 1xD 39 0.022 0.029 0.036 0.044 0.058 0.065 0.073
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 0,5xD 1xD 24 0.022 0.029 0.036 0.044 0.058 0.065 0.073
P.4 | Heat treatable steels ≤ 900 N/mm² 0,5xD 1xD 30 0.022 0.029 0.036 0.044 0.058 0.065 0.073
P.5 | Heat treatable steels ≤ 1100 N/mm² 0,5xD 1xD 24 0.022 0.029 0.036 0.044 0.058 0.065 0.073
P.6 | Tool and treated steels > 1100 N/mm² 0,5xD 1xD 20 0.0154 0.0203 0.0252 0.0308 0.0406 0.0455 0.0511
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 0,5xD 1xD 15 0.022 0.029 0.036 0.044 0.058 0.065 0.073
K.2 | Cast iron (> 240 HB) > 800 N/mm² 0,5xD 1xD 25 0.022 0.029 0.036 0.044 0.058 0.065 0.073
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 0,5xD 1xD 12 0.0154 0.0203 0.0252 0.0308 0.0406 0.0455 0.0511

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Feed direction possibility

Feed direction possibility

Tool geometry

Tool geometry

more +
Helix angle = 25°. Rake angle = 10°.
Material HSS Co8

Material HSS Co8

more +
Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.