T-slot cutters, type N, code 310340, diameter 18 mm

Home
Catalogue
T-slot cutters, type N, code 310340, diameter 18 mm

310340.180 High-speed steel HSS DIN 851

Cutting edges on the face and perimeter of the side and face cutter

Cutting conditions Product attributes

D h 12	MK	S h 12	l₁	l₃	d₁	Z	a	Item code	On stock
18	1	8	82	25	8	8	10	310340.180	Yes

Cutting conditions

Material	Strength	A_p	A_e	V_c	fz(mm/z) Ø 18	Ø 21	Ø 25	Ø 32	Ø 40	Ø 50	Ø 60	Ø 72
P.1 \| Free-cutting steels, general construction steels	≤ 600 N/mm²	0,1xS	D-d₁	28	0.014	0.017	0.028	0.036	0.042	0.05	0.057	0.065
P.2 \| General construction steels, steel castings	≤ 850 N/mm²	0,1xS	D-d₁	24	0.014	0.017	0.028	0.036	0.042	0.05	0.057	0.065
P.3 \| Tool steels low alloyed	≤ 1100 N/mm²	0,1xS	D-d₁	18	0.014	0.017	0.028	0.036	0.042	0.05	0.057	0.065
N.2 \| Aluminium cast alloys Si (Si ≤ 12%)	≤ 600 N/mm²	0,1xS	D-d₁	36	0.018	0.022	0.036	0.047	0.055	0.065	0.074	0.085
S.2 \| Titanium, titanium alloys	≤ 1250 N/mm²	0,1xS	D-d₁	9	0.01	0.012	0.02	0.025	0.029	0.035	0.04	0.046

Calculations of cutting conditions

Product attributes

Clamping element

more +

Morse taper shank according to DIN 228 A.

Tool geometry

more +

Helix angle = 10°. Rake angle = 10°.

Feed direction possibility

Type N

more +

Universal usage. Suitable for materials up to strength 900 MPa.

Cutting edges on the face and perimeter of the side and face cutter

Material HSS

more +

High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.