End mills short, coarse teeth, type W, Morse taper shank, code 410940, diameter 63 mm
| D | MK | l1 | l2 | Z | Item code | On stock |
|---|---|---|---|---|---|---|
| 63 | 5 | 241 | 80 | 6 | 410940.630 | Yes |
MK 3 a MK 5 ≠ DIN 845
Cutting conditions
Material | Strength | Ap | Ae | Vc | fz(mm/z) Ø 25 | Ø 32 | Ø 40 | Ø 50 |
|---|---|---|---|---|---|---|---|---|
| P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 1xD | 0,1xD | 30 | 0.071 | 0.08 | 0.11 | 0.12 |
| P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 1xD | 0,1xD | 26 | 0.071 | 0.08 | 0.11 | 0.12 |
| K.1 | Cast iron (< 240 HB) | ≤ 820 N/mm² | 1xD | 0,1xD | 25 | 0.071 | 0.08 | 0.11 | 0.12 |
| N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1xD | 0,1xD | 140-240 | 0.05 | 0.056 | 0.077 | 0.08 |
| N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 800 N/mm² | 1xD | 0,1xD | 50-90 | 0.071 | 0.08 | 0.11 | 0.12 |
Calculations of cutting conditions