End mills short, coarse teeth, type W, Morse taper shank, code 410245, diameter 45 mm
D
k 10 | MK | l1 | l2 | Z | Item code | On stock |
---|---|---|---|---|---|---|
45 | 4 | 188 | 63 | 4 | 410245.450 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 12 |
Ø 16 |
Ø 20 |
Ø 25 |
Ø 32 |
Ø 40 |
Ø 50 |
---|---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 1xD | 0,1xD | 30 | 0.034 | 0.044 | 0.057 | 0.071 | 0.08 | 0.11 | 0.12 |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 1xD | 0,1xD | 26 | 0.034 | 0.044 | 0.057 | 0.071 | 0.08 | 0.11 | 0.12 |
P.4 | Heat treatable steels | ≤ 900 N/mm² | 1xD | 0,1xD | 24 | 0.034 | 0.044 | 0.057 | 0.071 | 0.08 | 0.11 | 0.12 |
K.1 | Cast iron (< 240 HB) | ≤ 820 N/mm² | 1xD | 0,1xD | 25 | 0.034 | 0.044 | 0.057 | 0.071 | 0.08 | 0.11 | 0.12 |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1xD | 0,1xD | 140-240 | 0.024 | 0.031 | 0.04 | 0.05 | 0.056 | 0.077 | 0.08 |
N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 800 N/mm² | 1xD | 0,1xD | 50-90 | 0.034 | 0.044 | 0.057 | 0.071 | 0.08 | 0.11 | 0.12 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Morse taper shank according to DIN 228 A.
Tool geometry
more +Helix angle = 45°.
Rake angle = 22°.
Material HSS Co5
more +Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Type W
more +For machining of soft materials, for example aluminium and non-ferrous metals.