Frézy pro drážky per (drážkovací frézy) krátké, třízubé, nesouměrné, 30°, typ N, ploška weldon
Popis produktu
Frézy pro drážky per (drážkovací frézy) krátké, 3 zuby, nesouměrné, typ N, ploška weldon, vyrobené z rychlořezné oceli HSS Co8, dle normy DIN 327K, vhodné na drážkování, pro obrábění ocelí, nerezových ocelí, litiny, titanu a slitin titanu.
| D e 8 | d h 6 | l1 | l2 | Z | Kód zboží | Cena/ks | Skladem | Počet ks | |
|---|---|---|---|---|---|---|---|---|---|
| 2 | 6 | 48 | 4 | 3 | 230418.020 | 267,- Kč227,- Kč | Ano | ||
| 2,8 | 6 | 49 | 5 | 3 | 230418.028 | 305,- Kč259,- Kč | Ano | ||
| 3 | 6 | 49 | 5 | 3 | 230418.030 | 242,- Kč206,- Kč | Ano | ||
| 3,5 | 6 | 50 | 6 | 3 | 230418.035 | 272,- Kč231,- Kč | Ano | ||
| 3,8 | 6 | 51 | 7 | 3 | 230418.038 | 305,- Kč259,- Kč | Ano | ||
| 4 | 6 | 51 | 7 | 3 | 230418.040 | 242,- Kč206,- Kč | Ano | ||
| 4,5 | 6 | 51 | 7 | 3 | 230418.045 | 283,- Kč241,- Kč | Ano | ||
| 4,8 | 6 | 52 | 8 | 3 | 230418.048 | 319,- Kč271,- Kč | Ano | ||
| 5 | 6 | 52 | 8 | 3 | 230418.050 | 250,- Kč213,- Kč | Ano | ||
| 5,5 | 6 | 52 | 8 | 3 | 230418.055 | 272,- Kč231,- Kč | Ano | ||
| 5,75 | 6 | 52 | 8 | 3 | 230418.0575 | 310,- Kč264,- Kč | Ano | ||
| 6 | 6 | 52 | 8 | 3 | 230418.060 | 249,- Kč212,- Kč | Ano | ||
| 6,5 | 10 | 60 | 10 | 3 | 230418.065 | 354,- Kč301,- Kč | Ano | ||
| 7 | 10 | 60 | 10 | 3 | 230418.070 | 323,- Kč275,- Kč | Ano | ||
| 7,5 | 10 | 60 | 10 | 3 | 230418.075 | 360,- Kč306,- Kč | Ano | ||
| 7,75 | 10 | 61 | 11 | 3 | 230418.0775 | 416,- Kč354,- Kč | Ano | ||
| 8 | 10 | 61 | 11 | 3 | 230418.080 | 311,- Kč264,- Kč | Ano | ||
| 9 | 10 | 91 | 11 | 3 | 230418.090 | 396,- Kč337,- Kč | Ano | ||
| 9,5 | 10 | 61 | 11 | 3 | 230418.095 | 435,- Kč370,- Kč | Ano | ||
| 9,7 | 10 | 63 | 13 | 3 | 230418.097 | 453,- Kč385,- Kč | Ano | ||
| 10 | 10 | 63 | 13 | 3 | 230418.100 | 363,- Kč309,- Kč | Ano | ||
| 11 | 12 | 70 | 13 | 3 | 230418.110 | 434,- Kč369,- Kč | Ano | ||
| 12 | 12 | 73 | 16 | 3 | 230418.120 | 424,- Kč360,- Kč | Ano | ||
| 13 | 12 | 73 | 16 | 3 | 230418.130 | 555,- Kč472,- Kč | Ano | ||
| 14 | 12 | 73 | 16 | 3 | 230418.140 | 522,- Kč444,- Kč | Ano | ||
| 15 | 12 | 73 | 16 | 3 | 230418.150 | 686,- Kč583,- Kč | Ano | ||
| 16 | 16 | 79 | 19 | 3 | 230418.160 | 616,- Kč524,- Kč | Ano | ||
| 18 | 16 | 79 | 19 | 3 | 230418.180 | 746,- Kč634,- Kč | Ano | ||
| 19,7 | 20 | 88 | 22 | 3 | 230418.197 | 1 329,- Kč1 130,- Kč | Ano | ||
| 20 | 20 | 88 | 22 | 3 | 230418.200 | 949,- Kč807,- Kč | Ano | ||
| 22 | 20 | 88 | 22 | 3 | 230418.220 | 1 501,- Kč1 276,- Kč | Ne | ||
| 25 | 25 | 102 | 26 | 3 | 230418.250 | 1 951,- Kč1 658,- Kč | Ano | ||
| 28 | 25 | 102 | 26 | 3 | 230418.280 | 2 215,- Kč1 883,- Kč | Ano | ||
| 30 | 25 | 102 | 26 | 3 | 230418.300 | 2 756,- Kč2 343,- Kč | Ano | ||
| 32 | 32 | 112 | 32 | 3 | 230418.320 | 3 614,- Kč3 072,- Kč | Ano |
Řezné podmínky
Materiál | Pevnost | Ap | Ae | Vc | fz(mm/z) Ø 3 | Ø 6 | Ø 8 | Ø 10 | Ø 12 | Ø 16 | Ø 18 | Ø 20 | Ø 25 | Ø 32 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Automatové a konstrukční oceli | ≤ 600 N/mm² | 0,5xD | 1xD | 45 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| P.2 | Konstrukční a lité oceli | ≤ 850 N/mm² | 0,5xD | 1xD | 39 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| P.3 | Nástrojové oceli nízkolegované | ≤ 1100 N/mm² | 0,5xD | 1xD | 24 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| P.4 | Zušlechtěné oceli | ≤ 900 N/mm² | 0,5xD | 1xD | 30 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| M.2 | Nerezové oceli | 750 - 850 N/mm² | 0,5xD | 1xD | 15 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| K.1 | Litina (≤ 240 HB) | ≤ 820 N/mm² | 0,5xD | 1xD | 35 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| K.2 | Litina (> 240 HB) | > 800 N/mm² | 0,5xD | 1xD | 25 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| N.2 | Slitiny Al-Si (Si ≤ 12%) | ≤ 600 N/mm² | 0,5xD | 1xD | 160-300 | 0.0117 | 0.0286 | 0.0377 | 0.0468 | 0.0572 | 0.0754 | 0.0845 | 0.0949 | 0.1183 | 0.1508 |
| N.4 | Měď, slitiny mědi, mosaz, bronz | ≤ 800 N/mm² | 0,5xD | 1xD | 80-120 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| S.2 | Titan a slitiny titanu | ≤ 1250 N/mm² | 0,5xD | 1xD | 12 | 0.0063 | 0.0154 | 0.0203 | 0.0252 | 0.0308 | 0.0406 | 0.0455 | 0.0511 | 0.0637 | 0.0812 |
Vlastnosti produktu
Válcová stopka s ploškou (Weldon) dle DIN 1835 B.
Úhel šroubovice = 30°, úhel čela = 12°
Vysoce výkonná ocel s dobrou houževnatostí a výbornou teplotní odolností. Vhodná především pro frézování vysoce pevných materiálů, austenitických ocelí, ocelí pro tváření za tepla atd.
Univerzální použití. Vhodné pro materiály do pevnosti 900 Mpa.
