Frézy válcové čelní krátké na trochoidní frézování, λ 37°/30°, typ CB, hladká stopka, povlak AlCrN
| D | d | l1 | l2 | l3 | Dn | R | Z | Kód zboží | Cena/ks | Skladem | Počet ks | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 6 | 57 | 6 | 14 | 2,8 | 5 | S122502T.030 ALCRN | 810,- Kč 689,- Kč | Ano |
|
||
| 4 | 6 | 57 | 8 | 16 | 3,8 | 5 | S122502T.040 ALCRN | 810,- Kč 689,- Kč | Ano |
|
||
| 5 | 6 | 57 | 10 | 18 | 4,8 | 5 | S122502T.050 ALCRN | 810,- Kč 689,- Kč | Ano |
|
||
| 6 | 6 | 57 | 12 | 19 | 5,7 | 5 | S122502T.060 ALCRN | 810,- Kč 689,- Kč | Ne |
|
||
| 6 | 6 | 57 | 12 | 19 | 5,7 | 0,5 | 5 | S122502T.06005 ALCRN | 917,- Kč 779,- Kč | Ne |
|
|
| 6 | 6 | 57 | 12 | 19 | 5,7 | 1 | 5 | S122502T.06010 ALCRN | 917,- Kč 779,- Kč | Ne |
|
|
| 8 | 8 | 63 | 16 | 25 | 7,6 | 5 | S122502T.080 ALCRN | 1 051,- Kč 893,- Kč | Ne |
|
||
| 8 | 8 | 63 | 16 | 25 | 7,6 | 0,5 | 5 | S122502T.08005 ALCRN | 1 280,- Kč 1 088,- Kč | Ne |
|
|
| 8 | 8 | 63 | 16 | 25 | 7,6 | 1 | 5 | S122502T.08010 ALCRN | 1 280,- Kč 1 088,- Kč | Ne |
|
|
| 10 | 10 | 72 | 20 | 30 | 9,5 | 5 | S122502T.100 ALCRN | 1 546,- Kč 1 314,- Kč | Ano |
|
||
| 10 | 10 | 72 | 20 | 30 | 9,5 | 0,5 | 5 | S122502T.10005 ALCRN | 1 862,- Kč 1 583,- Kč | Ano |
|
|
| 10 | 10 | 72 | 20 | 30 | 9,5 | 1 | 5 | S122502T.10010 ALCRN | 1 862,- Kč 1 583,- Kč | Ano |
|
|
| 10 | 10 | 72 | 20 | 30 | 9,5 | 2 | 5 | S122502T.10020 ALCRN | 1 862,- Kč 1 583,- Kč | Ano |
|
|
| 12 | 12 | 83 | 24 | 36 | 11,5 | 5 | S122502T.120 ALCRN | 2 047,- Kč 1 740,- Kč | Ano |
|
||
| 12 | 12 | 83 | 24 | 36 | 11,5 | 0,5 | 5 | S122502T.12005 ALCRN | 2 418,- Kč 2 055,- Kč | Ano |
|
|
| 12 | 12 | 83 | 24 | 36 | 11,5 | 1 | 5 | S122502T.12010 ALCRN | 2 418,- Kč 2 055,- Kč | Ano |
|
|
| 12 | 12 | 83 | 24 | 36 | 11,5 | 2 | 5 | S122502T.12020 ALCRN | 2 418,- Kč 2 055,- Kč | Ano |
|
|
| 16 | 16 | 92 | 32 | 42 | 15,5 | 5 | S122502T.160 ALCRN | 3 642,- Kč 3 096,- Kč | Ano |
|
||
| 16 | 16 | 92 | 32 | 42 | 15,5 | 0,5 | 5 | S122502T.16005 ALCRN | 3 830,- Kč 3 256,- Kč | Ano |
|
|
| 16 | 16 | 92 | 32 | 42 | 15,5 | 1 | 5 | S122502T.16010 ALCRN | 3 830,- Kč 3 256,- Kč | Ano |
|
|
| 16 | 16 | 92 | 32 | 42 | 15,5 | 2 | 5 | S122502T.16020 ALCRN | 3 830,- Kč 3 256,- Kč | Ano |
|
|
| 20 | 20 | 104 | 40 | 52 | 19,5 | 5 | S122502T.200 ALCRN | 5 607,- Kč 4 766,- Kč | Ano |
|
||
| 20 | 20 | 104 | 40 | 52 | 19,5 | 1 | 5 | S122502T.20010 ALCRN | 5 968,- Kč 5 073,- Kč | Ano |
|
|
| 20 | 20 | 104 | 40 | 52 | 19,5 | 2 | 5 | S122502T.20020 ALCRN | 5 968,- Kč 5 073,- Kč | Ano |
|
Řezné podmínky
Materiál |
Pevnost |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 4 |
Ø 5 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 20 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Automatové a konstrukční oceli | ≤ 600 N/mm² | 2xD | 0.15xD | 300 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
| P.3 | Nástrojové oceli nízkolegované | ≤ 1100 N/mm² | 2xD | 0.15xD | 250 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
| P.5 | Nástrojové oceli vysocelegované | ≤ 1100 N/mm² | 2xD | 0.15xD | 210 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
| P.6 | Nástrojové a zušlechtěné oceli | > 1100 N/mm² | 2xD | 0.15xD | 210 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
| K.1 | Litina (≤ 240 HB) | ≤ 820 N/mm² | 2xD | 0.15xD | 250 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
| H.1 | Kalené oceli (< 54 HRC) | ≤ 1920 N/mm² | 2xD | 0.15xD | 100 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
| H.2 | Kalené oceli (< 54 HRC) | 1920-2210 N/mm² | 2xD | 0.15xD | 90 | 0.014 | 0.18 | 0.023 | 0.028 | 0.037 | 0.046 | 0.055 | 0.074 | 0.092 |
Vlastnosti produktu
Hladká válcová stopka dle DIN 6535 HA.
Přerušené ostří - univerzální použití pro hrubování.
Možné směry posuvu - jeden směr
Provedení čela - rádius
Karbidové materiály se vyznačují vysokou pevností v tlaku, vysokou tvrdostí a tedy vysokou odolností vůči opotřebení, ale také omezenou pevností v ohybu a houževnatostí.