739275 High-speed steel HSS Co5 DIN 885 B
Clamping element
Type H
Tool geometry
Cutting edges on the face and perimeter of the side and face cutter
Material HSS Co5
Side and face milling cutters, straight teeth, type H
D
js 16
S
k 11
d
H 7
Z Item code On stock
50 4 16 16 739275.05004 Yes
50 5 16 16 739275.05005 Yes
50 6 16 16 739275.05006 Yes
50 8 16 16 739275.05008 Yes
50 10 16 16 739275.05010 Yes
63 4 22 18 739275.06304 Yes
63 5 22 18 739275.06305 Yes
63 6 22 18 739275.06306 Yes
63 8 22 18 739275.06308 Yes
63 10 22 18 739275.06310 Yes
63 12 22 18 739275.06312 Yes
63 14 22 18 739275.06314 Yes
63 16 22 18 739275.06316 Yes
63 18 22 18 739275.06318 Yes
80 4 27 20 739275.08004 Yes
80 5 27 20 739275.08005 Yes
80 6 27 20 739275.08006 Yes
80 8 27 20 739275.08008 Yes
80 10 27 20 739275.08010 Yes
80 12 27 20 739275.08012 Yes
80 14 27 20 739275.08014 Yes
80 16 27 20 739275.08016 Yes
80 18 27 20 739275.08018 Yes
80 20 27 20 739275.08020 Yes
100 6 32 24 739275.10006 Yes
100 8 32 24 739275.10008 Yes
100 10 32 24 739275.10010 Yes
100 12 32 24 739275.10012 Yes
100 14 32 24 739275.10014 Yes
100 16 32 24 739275.10016 Yes
100 18 32 24 739275.10018 Yes
100 20 32 24 739275.10020 Yes
100 22 32 24 739275.10022 Yes
100 25 32 24 739275.10025 Yes
125 6 32 24 739275.12506 Yes
125 8 32 24 739275.12508 Yes
125 10 32 24 739275.12510 Yes
125 12 32 24 739275.12512 Yes
125 14 32 24 739275.12514 Yes
125 16 32 24 739275.12516 Yes
125 18 32 24 739275.12518 Yes
125 20 32 24 739275.12520 Yes
125 25 32 24 739275.12525 Yes
160 10 40 24 739275.16010 No
160 12 40 24 739275.16012 Yes
160 14 40 24 739275.16014 Yes
160 16 40 24 739275.16016 Yes
160 18 40 24 739275.16018 Yes
160 20 40 24 739275.16020 Yes
200 10 40 32 739275.20010 Yes
200 12 40 32 739275.20012 Yes
200 14 40 32 739275.20014 Yes
200 16 40 32 739275.20016 Yes
200 18 40 32 739275.20018 Yes
200 20 40 32 739275.20020 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 50

Ø 80

Ø 100

Ø 160

Ø 200
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 0,1xD 1xb 37.5 0.05 0.07 0.08 0.09 0.09
P.2 | General construction steels, steel castings ≤ 850 N/mm² 0,1xD 1xb 32.5 0.05 0.07 0.08 0.09 0.09
P.4 | Heat treatable steels ≤ 900 N/mm² 0,1xD 1xb 25 0.05 0.07 0.08 0.09 0.09
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 0,1xD 1xb 18 0.05 0.07 0.08 0.09 0.09
K.1 | Cast iron < 240 HB 0,1xD 1xb 30 0.05 0.07 0.08 0.09 0.09
K.2 | Cast iron > 240 HB 0,1xD 1xb 22 0.05 0.07 0.08 0.09 0.09
N.4 | Cooper-zinc alloys, cooper-tin alloys ≤ 800 N/mm² 0,1xD 1xb 60-100 0.05 0.07 0.08 0.09 0.09

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight bore with standard keyway according to DIN 138.
Tool geometry

Tool geometry

more +
Helix angle = 0°. Rake angle = 8°.
Material HSS Co5

Material HSS Co5

more +
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Type H

Type H

more +
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
Cutting edges on the face and perimeter of the side and face cutter

Cutting edges on the face and perimeter of the side and face cutter