624277PV AlTiN High-speed steel HSSE-PM DIN 1880
Clamping element
Type NR-F
Tool geometry
Feed direction possibility
Material HSSE-PM
Coating AlTiN
D
js 16
d l1 Z Item code On stock
40 16 32 6 624277PV.040 AlTiN No
50 22 36 6 624277PV.050 AlTiN No
63 27 40 8 624277PV.063 AlTiN No
80 27 45 8 624277PV.080 AlTiN No
100 32 50 10 624277PV.100 AlTiN No

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 40

Ø 50

Ø 63

Ø 100
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 0,8xl1 0,75xD 45 0.144 0.153 0.18 0.207
P.2 | General construction steels, steel castings ≤ 850 N/mm² 0,8xl1 0,75xD 39 0.144 0.153 0.18 0.207
P.4 | Heat treatable steels ≤ 900 N/mm² 0,8xl1 0,75xD 30 0.144 0.153 0.18 0.207
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 0,8xl1 0,75xD 15 0.144 0.153 0.18 0.207
K.2 | Cast iron (> 240 HB) > 800 N/mm² 0,8xl1 0,75xD 25 0.144 0.153 0.18 0.207
S.2 I Titanium, titaium alloys ≤ 1250 N/mm² 0,8xl1 0,75xD 12 0.1005 0.1065 0.126 0.1455

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight bore with standard keyway and driving slot according to DIN 138.
Tool geometry

Tool geometry

more +
Helix angle = 30°. Rake angle = 12°.
Material HSSE-PM

Material HSSE-PM

more +
Extra high performance high speed steel produced by powder metallurgy. It has a homogeneous structure resulting in higher dimension stability and longer tool life. It is applicable for machining of materials with very high strength and materials hard to machine, such as Titanium and its alloys. The milling cutters made from this material are delivered with AlTiN coating as a standard.
Type NR-F

Type NR-F

more +
For machining of materials of lower and medium strength (up to 700 MPa), surface roughness Ra 3,2 and more, in common application can be applied as roughing and finishing tool at the same time.
Feed direction possibility

Feed direction possibility

Coating AlTiN

Coating AlTiN

more +
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.