English
  1. Home
  2. Search

Search

100405
End mills short, 1 tooth cut over centre, 30°, type W, plain shank

End mills short, 1 tooth cut over centre, 30°, type W, plain shank

  • High-speed steel HSS Co5
100405 SET
Set of end mills short, 1 tooth cut over centre, 30°, type W, plain shank

Set of end mills short, 1 tooth cut over centre, 30°, type W, plain shank

  • High-speed steel HSS Co5
100405 ZrN
End mills short, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN

End mills short, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN

  • High-speed steel HSS Co5
101405
End mills long, 1 tooth cut over centre, 30°, type W, plain shank

End mills long, 1 tooth cut over centre, 30°, type W, plain shank

  • High-speed steel HSS Co5
101405 ZrN
End mills long, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN

End mills long, 1 tooth cut over centre, 30°, type W, plain shank, coating ZrN

  • High-speed steel HSS Co5
104418P
End mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

End mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
104418P SET
Set of end mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

Set of end mills short, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
105418P
End mills long, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

End mills long, 1 tooth cut over centre, 35°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
110418
End mills short, 1 tooth cut over centre, 40°, type W, Weldon shank

End mills short, 1 tooth cut over centre, 40°, type W, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
111418
End mills long, 1 tooth cut over centre, 40°, type W, Weldon shank

End mills long, 1 tooth cut over centre, 40°, type W, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
114418
End mills short for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank

End mills short for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
115418
End mills long for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank

End mills long for Aluminium roughing, 1 tooth cut over centre, 35°, type WR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
120218K
End mills extra short, type N, 30°, Weldon shank

End mills extra short, type N, 30°, Weldon shank

  • High-speed steel HSS Co8
120417 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
120508
End mills short, 1 tooth cut over centre, 30°, type N, plain shank

End mills short, 1 tooth cut over centre, 30°, type N, plain shank

  • High-speed steel HSS Co8
  • DIN 844K
120517 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
120517 AlTiN SET
Set of end mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

Set of end mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
120517R AlTiN
End mills with corner radius, 30°, type N, Weldon shank, coating AlTiN

End mills with corner radius, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
120518
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
120518 SET
Set of end mills short, 1 tooth cut over centre, type N

Set of end mills short, 1 tooth cut over centre, type N

  • High-speed steel HSS Co8
  • DIN 844K
120518 TiAlN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844K
121215E
End mils extra long, type N, 30°, Weldon shank

End mils extra long, type N, 30°, Weldon shank

  • High-speed steel HSS Co5
121517 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844L
121518
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
121518 TiAlN
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844L
124218K
End mills extra short, type NR, 30°, Weldon shank

End mills extra short, type NR, 30°, Weldon shank

  • High-speed steel HSS Co8
124417 AlTiN
End mills short, 1 tooth cut over centre, λ 30°, type NR, weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, λ 30°, type NR, weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
124517 AlTiN
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
124518
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
124518 SET
Set of end mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank

Set of end mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank

  • High-speed steel HSS Co5
  • DIN 844K
124518 TiAlN
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co5
  • DIN 844K
124518P
End mills short, 1 tooth cut over centre, 30°, type NR-F, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
125215E
End mils extra long, type NR, 30°, Weldon shank

End mils extra long, type NR, 30°, Weldon shank

  • High-speed steel HSS Co5
125517 AlTiN
End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844L
125518
End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
125518 TiAlN
End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN

End mills long, 1 tooth cut over centre, 30°, type NR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844L
125518P
End mills long, 1 tooth cut over centre, 30°, type NR-F, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type NR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
128517 AlTiN
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
128517P AlTiN
End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
128517X AlTiN
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
128518
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
128518 TiAlN
End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

End mills short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844K
128518P
End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type HR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
128518S
End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank

End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank

  • High-speed steel HSS Co8
128518S TiAlN
End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

End mills extra short, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
129517 AlTiN
End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844L
129518
End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
129518 TiAlN
End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

End mills long, 1 tooth cut over centre, 30°, type HR, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844L
129518P
End mills long, 1 tooth cut over centre, 30°, type HR-F, Weldon shank

End mills long, 1 tooth cut over centre, 30°, type HR-F, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
140208
End mills short, 40°, type N, plain shank

End mills short, 40°, type N, plain shank

  • High-speed steel HSS Co8
  • DIN 844K
140218
End mills short, 40°/35°, type N, Weldon shank

End mills short, 40°/35°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
140418
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
140418 TiAlN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844K
140617X AlTiN
End mills with variable helix angle, 38°-42°, type N, Weldon shank, coating AlTiN

End mills with variable helix angle, 38°-42°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
140618
End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank

End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
140618 SET
Set of end mills short, 2 teeth cut to centre, 40°, type N, Weldon shank

Set of end mills short, 2 teeth cut to centre, 40°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
140618 TiAlN
End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN

End mills short, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844K
141208
End mills long, 40°, type N, plain shank

End mills long, 40°, type N, plain shank

  • High-speed steel HSS Co8
  • DIN 844L
141218
End mills long, 40°/35°, type N, Weldon shank

End mills long, 40°/35°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
141618
End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank

End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
141618 TiAlN
End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN

End mills long, 2 teeth cut to centre, 40°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 844L
148517R AlTiN
End mills with corner radius, type HR, 45°, Weldon shank, coating AlTiN

End mills with corner radius, type HR, 45°, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
148617 AlTiN
End mills short, 1 tooth cut over centre, 45°, type HR, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 45°, type HR, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 844K
150617S AlCrN
End mills for stainless steel, 50°, type N, Weldon shank, coating AlCrN

End mills for stainless steel, 50°, type N, Weldon shank, coating AlCrN

  • High-speed steel HSSE-PM
150617S AlTiN
End mills for stainless steel, 50°, type N, Weldon shank, coating AlTiN

End mills for stainless steel, 50°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
160418
Mini end mills short, 30°, type N, Weldon shank

Mini end mills short, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
160418 TiAlN
Mini end mills short, 30°, type N, Weldon shank, coating TiAlN

Mini end mills short, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
161418
Mini end mills long, 30°, type N, Weldon shank

Mini end mills long, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
161418 TiAlN
Mini end mills long, 30°, type N, Weldon shank, coating TiAlN

Mini end mills long, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
220408
Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank

Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank

  • High-speed steel HSS Co8
  • DIN 327K
220408 TiAlN
Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank, coating TiAlN

Slot drills short, 2-fluted, centre cutting, 25°, type N, plain shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 327K
220417 AlTiN
Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating AlTiN

Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 327K
220418
Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank

Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327K
220418 SET
Set of slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank

Set of slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327K
220418 TiAlN
Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN

Slot drills short, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 327K
221408
Slot drills long, 2-fluted, centre cutting, 25°, type N, plain shank

Slot drills long, 2-fluted, centre cutting, 25°, type N, plain shank

  • High-speed steel HSS Co8
221418
Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank

Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
221418 SET
Set of slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank

Set of slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
221418 TiAlN
Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN

Slot drills long, 2-fluted, centre cutting, 25°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
230417 AlTiN
Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating AlTiN

Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 327K
230418
Slot drills short, 3-fluted, centre cutting, 25°, type N, Weldon shank

Slot drills short, 3-fluted, centre cutting, 25°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327K
230418 SET
Set of end mills, short, 3-fluted, λ 30°, type N, weldon shank

Set of end mills, short, 3-fluted, λ 30°, type N, weldon shank

  • High-speed steel HSS-Co8
  • DIN 327
230418 TiAlN
Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 327K
230418H
Slot drills short, 3-fluted centre cutting, 30°, type N, Weldon shank

Slot drills short, 3-fluted centre cutting, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327K
231418
Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank

Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
  • DIN 327L
231418 TiAlN
Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

Slot drills long, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 327L
233418
Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank

Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank

  • High-speed steel HSS Co8
233418 TiAlN
Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

Slot drills extra long, 3 fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN

  • High-speed steel HSS Co8
260545
Tapper shank slot drills short, centre cutting, 2-fluted, 25°, type N

Tapper shank slot drills short, centre cutting, 2-fluted, 25°, type N

  • High-speed steel HSS Co5
  • DIN 326
270618
Slot drills short, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank

Slot drills short, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844K
273618
Slot drills long, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank

Slot drills long, 2-fluted, 2 teeth cut to centre, 40°, type W, Weldon shank

  • High-speed steel HSS Co8
  • DIN 844L
310205
T-slot cutters, type N, plain shank

T-slot cutters, type N, plain shank

  • High-speed steel HSS Co5
  • DIN 851
310215
T-slot cutters, type N, Weldon shank

T-slot cutters, type N, Weldon shank

  • High-speed steel HSS Co5
  • DIN 851
310340
Tapper shank T-slot cutters, type N

Tapper shank T-slot cutters, type N

  • High-speed steel HSS
  • DIN 851
314215N
T-slot cutters, type NR, Weldon shank

T-slot cutters, type NR, Weldon shank

  • High-speed steel HSS Co5
  • DIN 851
314215P
T-slot cutters, type NR-F, Weldon shank

T-slot cutters, type NR-F, Weldon shank

  • High-speed steel HSS Co5
  • DIN 851
314215PH
T-slot cutters, type NR-F, Weldon shank

T-slot cutters, type NR-F, Weldon shank

  • High-speed steel HSS Co5
  • DIN 851
320005
Woodruff keyseat cutters, plain shank

Woodruff keyseat cutters, plain shank

  • High-speed steel HSS Co5
  • DIN 850
320015
Woodruff keyseat cutters, Weldon shank

Woodruff keyseat cutters, Weldon shank

  • High-speed steel HSS Co5
  • DIN 850
320100
Woodruff keyseat cutters, plain shank

Woodruff keyseat cutters, plain shank

  • High-speed steel HSS
330205
Dovetail milling cutters, plain shank

Dovetail milling cutters, plain shank

  • High-speed steel HSS Co5
  • DIN 1833A
330215
Dovetail milling cutters, Weldon shank

Dovetail milling cutters, Weldon shank

  • High-speed steel HSS Co5
  • DIN 1833C
350005
Inverted dovetail milling cutters, plain shank

Inverted dovetail milling cutters, plain shank

  • High-speed steel HSS Co5
  • DIN 1833B
350015
Inverted dovetail milling cutters, Weldon shank

Inverted dovetail milling cutters, Weldon shank

  • High-speed steel HSS Co5
  • DIN 1833D
360018
Corner rounding concave cutters, Weldon shank

Corner rounding concave cutters, Weldon shank

  • High-speed steel HSS Co8
  • DIN 6518
410245
Tapper shank end mills short, coarse teeth, 45°, type W

Tapper shank end mills short, coarse teeth, 45°, type W

  • High-speed steel HSS Co5
  • DIN 845
410940
Tapper shank end mills short, coarse teeth, 45°, type W

Tapper shank end mills short, coarse teeth, 45°, type W

  • High-speed steel HSS
  • DIN 845
411245
Tapper shank end mills long, coarse teeth, 45°, type W

Tapper shank end mills long, coarse teeth, 45°, type W

  • High-speed steel HSS Co5
  • DIN 845
411940
Tapper shank end mills long, coarse teeth, 45°, type W

Tapper shank end mills long, coarse teeth, 45°, type W

  • High-speed steel HSS
  • DIN 845
420245
Tapper shank end mills short, semicoarse teeth, 35°, type N

Tapper shank end mills short, semicoarse teeth, 35°, type N

  • High-speed steel HSS Co5
  • DIN 845
420940
Tapper shank end mills short, semicoarse teeth, 35°, type N

Tapper shank end mills short, semicoarse teeth, 35°, type N

  • High-speed steel HSS
  • DIN 845
421245
Tapper shank end mills long, semicoarse teeth, 35°, type N

Tapper shank end mills long, semicoarse teeth, 35°, type N

  • High-speed steel HSS Co5
  • DIN 845
421940
Tapper shank end mills long, semicoarse teeth, 35°, type N

Tapper shank end mills long, semicoarse teeth, 35°, type N

  • High-speed steel HSS
  • DIN 845
422245
Tapper shank end mills short, semicoarse teeth, 35°, type CB

Tapper shank end mills short, semicoarse teeth, 35°, type CB

  • High-speed steel HSS Co5
  • DIN 845
422940
Tapper shank end mills short, semicoarse teeth, 35°, type CB

Tapper shank end mills short, semicoarse teeth, 35°, type CB

  • High-speed steel HSS
  • DIN 845
423245
Tapper shank end mills long, semicoarse teeth, 35°, type CB

Tapper shank end mills long, semicoarse teeth, 35°, type CB

  • High-speed steel HSS Co5
  • DIN 845
423940
Tapper shank end mills long, semicoarse teeth, 35°, type CB

Tapper shank end mills long, semicoarse teeth, 35°, type CB

  • High-speed steel HSS
  • DIN 845
424248
Tapper shank end mills short, 30°, type NR

Tapper shank end mills short, 30°, type NR

  • High-speed steel HSS Co8
  • DIN 845B, DIN 845C
425248
Tapper shank end mills long, 30°, type NR

Tapper shank end mills long, 30°, type NR

  • High-speed steel HSS Co8
  • DIN 845B, DIN 845C
440248
Tapper shank end mills short, for titanium machining, 35°, type H

Tapper shank end mills short, for titanium machining, 35°, type H

  • High-speed steel HSS Co8
  • DIN 845B
441248
Tapper shank end mills long, for titanium machining, 35°, type H

Tapper shank end mills long, for titanium machining, 35°, type H

  • High-speed steel HSS Co8
  • DIN 845B
442248
Tapper shank end mills short, for titanium machining, 35°, type CB

Tapper shank end mills short, for titanium machining, 35°, type CB

  • High-speed steel HSS Co8
  • DIN 845B
443248
Tapper shank end mills long, for titanium machining, 35°, type CB

Tapper shank end mills long, for titanium machining, 35°, type CB

  • High-speed steel HSS Co8
  • DIN 845B
510417 AlTiN
Ball nose end mills short, 2-fluted, 25°, Weldon shank, coating AlTiN

Ball nose end mills short, 2-fluted, 25°, Weldon shank, coating AlTiN

  • High-speed steel HSSE-PM
  • ~DIN 1889
510418
Ball nose end mills short, 2-fluted, 25°, Weldon shank

Ball nose end mills short, 2-fluted, 25°, Weldon shank

  • High-speed steel HSS Co8
  • ~DIN 1889
511418
Ball nose end mills long, 2-fluted, 25°, Weldon shank

Ball nose end mills long, 2-fluted, 25°, Weldon shank

  • High-speed steel HSS Co8
530718
Ball nose end mills short, semicircular teeth, Weldon shank

Ball nose end mills short, semicircular teeth, Weldon shank

  • High-speed steel HSS Co8
  • ~DIN 1889
531718
Ball nose end mills long, semicircular teeth, Weldon shank

Ball nose end mills long, semicircular teeth, Weldon shank

  • High-speed steel HSS Co8
  • ~DIN 1889
580718
Die sinking cutters tapered, 4-fluted, 25°, Weldon shank

Die sinking cutters tapered, 4-fluted, 25°, Weldon shank

  • High-speed steel HSS Co8
610275V
Shell end mills, coarse teeth, type W

Shell end mills, coarse teeth, type W

  • High-speed steel HSS Co5
  • DIN 1880
610973
Shell end mills, coarse teeth, type W

Shell end mills, coarse teeth, type W

  • High-speed steel HSSE
620075
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSS Co5
620275
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSS Co5
  • DIN 1880
620275 TiAlN
Shell end mills, semicoarse teeth, type N, coating TiAlN

Shell end mills, semicoarse teeth, type N, coating TiAlN

  • High-speed steel HSS Co5
  • DIN 1880
620277 AlTiN
Shell end mills, semicoarse teeth, type N, coating AlTiN

Shell end mills, semicoarse teeth, type N, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
620278V
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSS Co8
  • DIN 1880
620278V TiAlN
Shell end mills, semicoarse teeth, type N, coating TiAlN

Shell end mills, semicoarse teeth, type N, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 1880
620973
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSSE
624275
Shell end mills, semicoarse teeth, type NR

Shell end mills, semicoarse teeth, type NR

  • High-speed steel HSS Co5
  • DIN 1880
624275 TiAlN
Shell end mills, semicoarse teeth, type NR, coating TiAlN

Shell end mills, semicoarse teeth, type NR, coating TiAlN

  • High-speed steel HSS Co5
  • DIN 1880
624277 AlTiN
Shell end mills, semicoarse teeth, type NR, coating AlTiN

Shell end mills, semicoarse teeth, type NR, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
624277PV AlTiN
Shell end mills, semicoarse teeth, type NR-F, coating AlTiN

Shell end mills, semicoarse teeth, type NR-F, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
624278PV
Shell end mills, semicoarse teeth, type NR-F

Shell end mills, semicoarse teeth, type NR-F

  • High-speed steel HSS Co8
  • DIN 1880
624278V
Shell end mills, semicoarse teeth, type NR

Shell end mills, semicoarse teeth, type NR

  • High-speed steel HSS Co8
  • DIN 1880
624278V TiAlN
Shell end mills, semicoarse teeth, type NR, coating TiAlN

Shell end mills, semicoarse teeth, type NR, coating TiAlN

  • High-speed steel HSS Co8
  • DIN 1880
628275
Shell end mills, semicoarse teeth, type HR

Shell end mills, semicoarse teeth, type HR

  • High-speed steel HSS Co5
  • DIN 1880
628275 TiAlN
Shell end mills, semicoarse teeth, type HR, coating TiAlN

Shell end mills, semicoarse teeth, type HR, coating TiAlN

  • High-speed steel HSS Co5
  • DIN 1880
628277 AlTiN
End mills, semicoarse teeth, λ 30°, type HR, coating AlTiN

End mills, semicoarse teeth, λ 30°, type HR, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
628277P AlTiN
End mills, semicoarse teeth, λ 30°, type HR-F, coating AlTiN

End mills, semicoarse teeth, λ 30°, type HR-F, coating AlTiN

  • High-speed steel HSSE-PM
  • DIN 1880
630275V
Shell end mills, fine teeth, type H

Shell end mills, fine teeth, type H

  • High-speed steel HSS Co5
  • DIN 1880
630973
Shell end mills, fine teeth, type H

Shell end mills, fine teeth, type H

  • High-speed steel HSSE
680275V
Shell end mills, semicoarse teeth, type N

Shell end mills, semicoarse teeth, type N

  • High-speed steel HSS Co5
  • DIN 841
684275PV
Shell end mills, semicoarse teeth, type NR-F

Shell end mills, semicoarse teeth, type NR-F

  • High-speed steel HSS Co5
  • DIN 841
684275V
Shell end mills, semicoarse teeth, type NR

Shell end mills, semicoarse teeth, type NR

  • High-speed steel HSS Co5
  • DIN 841
690275V
Shell end mills, fine teeth, type H

Shell end mills, fine teeth, type H

  • High-speed steel HSS Co5
  • DIN 841
720275
Side and face milling cutters, semicoarse teeth, type N

Side and face milling cutters, semicoarse teeth, type N

  • High-speed steel HSS Co5
  • DIN 885A
720373
Side and face milling cutters, semicoarse teeth, type N

Side and face milling cutters, semicoarse teeth, type N

  • High-speed steel HSSE
722461
Bi-metal band saw blades, Profile series, V-POS

Bi-metal band saw blades, Profile series, V-POS

  • High speed steel bi-metal HSS-M42
722910
Metal slitting saws, type H

Metal slitting saws, type H

  • High-speed steel HSS
  • DIN 1837
722913
Metal slitting saws, type N

Metal slitting saws, type N

  • High-speed steel HSS
  • DIN 1838
726275
Narrow side and face milling cutters, type N

Narrow side and face milling cutters, type N

  • High-speed steel HSS Co5
730270
Side and face milling cutters, fine teeth, type H

Side and face milling cutters, fine teeth, type H

  • High-speed steel HSS
  • DIN 885A
730275
Side and face milling cutters, fine teeth, type H

Side and face milling cutters, fine teeth, type H

  • High-speed steel HSS Co5
  • DIN 885A
730278
Side and face milling cutters, fine teeth, type H

Side and face milling cutters, fine teeth, type H

  • High-speed steel HSS Co8
  • DIN 885A
730373
Side and face milling cutters, fine teeth, type H

Side and face milling cutters, fine teeth, type H

  • High-speed steel HSSE
736275
Narrow side and face milling cutters, fine teeth, type H

Narrow side and face milling cutters, fine teeth, type H

  • High-speed steel HSS Co5
  • DIN 1834A
737275
Narrow side and face milling cutters, fine teeth, straight teeth, type N

Narrow side and face milling cutters, fine teeth, straight teeth, type N

  • High-speed steel HSS Co5
  • DIN 1834B
739275
Side and face milling cutters, straight teeth, type H

Side and face milling cutters, straight teeth, type H

  • High-speed steel HSS Co5
  • DIN 885B
810070
Half circle milling cutters convex

Half circle milling cutters convex

  • High-speed steel HSS
  • ~DIN 856
810075V
Half circle milling cutters convex

Half circle milling cutters convex

  • High-speed steel HSS Co5
  • ~DIN 856
820070
Half circle milling cutters concave

Half circle milling cutters concave

  • High-speed steel HSS
  • ~DIN 855A
820075V
Half circle milling cutters concave

Half circle milling cutters concave

  • High-speed steel HSS Co5
  • ~DIN 855A
852570
Single angle milling cutters

Single angle milling cutters

  • High-speed steel HSS
  • ~DIN 1824A
853270
Single angle milling cutters

Single angle milling cutters

  • High-speed steel HSS
  • DIN 842
853275V
Single angle milling cutters

Single angle milling cutters

  • High-speed steel HSS Co5
  • DIN 842
857070
Double angle milling cutters, symmetrical

Double angle milling cutters, symmetrical

  • High-speed steel HSS
  • DIN 847
857075V
Double angle milling cutters, symmetrical

Double angle milling cutters, symmetrical

  • High-speed steel HSS Co5
  • DIN 847
890070
Involute gear cutters for spur wheels, pressure angle 20°

Involute gear cutters for spur wheels, pressure angle 20°

  • High-speed steel HSS
  • DIN 3972
890070 SET
Set - Involute gear cutters for spur wheels, pressure angle 20°

Set - Involute gear cutters for spur wheels, pressure angle 20°

  • High-speed steel HSS
  • DIN 3972
890075
Involute gear cutters for spur wheels, pressure angle 20°

Involute gear cutters for spur wheels, pressure angle 20°

  • High-speed steel HSS Co5
  • DIN 3972
C10012
Solid carbide drills, 5xD

Solid carbide drills, 5xD

  • Solid carbide (SC)
C100402
End mills short, 1 tooth cut over centre, 30°, type N, plain shank

End mills short, 1 tooth cut over centre, 30°, type N, plain shank

  • Solid carbide (SC)
C120402
End mills short, 1 tooth cut over centre, 30°, type N, plain shank

End mills short, 1 tooth cut over centre, 30°, type N, plain shank

  • Solid carbide (SC)
C120602
End mills short, 2 teeth cut to centre, 30°, type N, plain shank

End mills short, 2 teeth cut to centre, 30°, type N, plain shank

  • Solid carbide (SC)
C121302
End mills long, 1 tooth cut over centre, 20°, type W, plain shank

End mills long, 1 tooth cut over centre, 20°, type W, plain shank

  • Solid carbide (SC)
C121312
End mills long, 1 tooth cut over centre, 20°, type W, Weldon

End mills long, 1 tooth cut over centre, 20°, type W, Weldon

  • Solid carbide (SC)
C160402
Mini end mills, 1 tooth cut over centre, 30°, plain shank

Mini end mills, 1 tooth cut over centre, 30°, plain shank

  • Solid carbide (SC)
C30012
Solid carbide drills, 3xD

Solid carbide drills, 3xD

  • Solid carbide (SC)
CD71090
Circular dies

Circular dies

  • High-speed steel HSS
  • DIN EN 22 568
CD72090
Circular dies, fine metric thread

Circular dies, fine metric thread

  • High-speed steel HSS
  • DIN EN 22 568
CD81075
Circular dies, for stainless steel

Circular dies, for stainless steel

  • High-speed steel HSS Co5
  • DIN EN 22 568
CD82075
Circular dies, for stainless steel, fine metric thread

Circular dies, for stainless steel, fine metric thread

  • High-speed steel HSS Co5
  • DIN EN 22 568
CS11305
Counterbores with fixed pilot, 180°

Counterbores with fixed pilot, 180°

  • High-speed steel HSS Co5
  • DIN 373
CS21002 TiAlN
Countersinks, Basic series, coating TiAlN

Countersinks, Basic series, coating TiAlN

  • Solid carbide (SC)
CS21005
Machine countersinks, Pro series

Machine countersinks, Pro series

  • High-speed steel HSS-Co5
  • DIN 335C
CS21005 SET
Set of machine countersinks, Pro series

Set of machine countersinks, Pro series

  • High-speed steel HSS-Co5
  • DIN 335C
CS21005 TiAlN
Machine countersinks, Pro series, coating TiAlN

Machine countersinks, Pro series, coating TiAlN

  • High-speed steel HSS-Co5
  • DIN 335C
CS25040
Countersinks with tapered shank

Countersinks with tapered shank
CS25205
Countersinks 90°

Countersinks 90°

  • High-speed steel HSS Co5
  • DIN 335C
CS25205 SET
Sada kuželových záhlubníků, řada Basic

Sada kuželových záhlubníků, řada Basic

  • Rychlořezná ocel HSS-Co5
  • DIN 335C
CS27105
Deburring countersinks

Deburring countersinks
CS27105 PAS
Deburring countersinks, passivated

Deburring countersinks, passivated
DPR12017X
Cylindrical face cutters, short, 2 cutting edges to centre, 30°, type N, weldon face, diameter 12.7 mm

Cylindrical face cutters, short, 2 cutting edges to centre, 30°, type N, weldon face, diameter 12.7 mm

  • High-speed steel HSS Co8
DPR12018
Cylindrical face cutters, short, 1 cutting edge across the centre, 30°, type N, weldon flat, diameter 31.75 mm

Cylindrical face cutters, short, 1 cutting edge across the centre, 30°, type N, weldon flat, diameter 31.75 mm

  • High-speed steel HSS Co8
DPR12118
Face cutters, long, 1 cutting edge across the centre, 30°, type N, weldon flat, diameter 19 mm

Face cutters, long, 1 cutting edge across the centre, 30°, type N, weldon flat, diameter 19 mm

  • High-speed steel HSS Co8
DPR12518
Cylindrical face cutters, long, 2 cutting edges through the centre, 30°, type NR, weldon flat, diameter 31.75 mm

Cylindrical face cutters, long, 2 cutting edges through the centre, 30°, type NR, weldon flat, diameter 31.75 mm

  • High-speed steel HSS Co8
DPR12617 ALTIN
Cylindrical face milling cutters, short, 2 edges across the centre, 30°, NR type, weldon face, diameter 12.7 mm, AlTiN coating

Cylindrical face milling cutters, short, 2 edges across the centre, 30°, NR type, weldon face, diameter 12.7 mm, AlTiN coating

  • High-speed steel HSS Co8
DPR12617L ALTIN
Cylindrical face milling cutters, long, 2 cutting edges across the centre, 30°, type NR, weldon flat, AlTiN coating

Cylindrical face milling cutters, long, 2 cutting edges across the centre, 30°, type NR, weldon flat, AlTiN coating

  • High-speed steel HSS Co8
DPR12618P ALTIN
Cylindrical face milling cutters, short, 2 edges across the centre, 30°, type N, weldon flat, diameter 12 mm, AlTiN coating

Cylindrical face milling cutters, short, 2 edges across the centre, 30°, type N, weldon flat, diameter 12 mm, AlTiN coating

  • High-speed steel HSS Co8
DPR12618PX AlTiN
Cylindrical face milling cutters, short, 2 edges across the centre, 30°, type NR, weldon face, diameter 6 mm, AlTiN coating

Cylindrical face milling cutters, short, 2 edges across the centre, 30°, type NR, weldon face, diameter 6 mm, AlTiN coating

  • High-speed steel HSS Co8
DPR12717 ALTIN
Cylindrical face milling cutters, short, 2 edges across the centre, 30°, NR type, weldon face, diameter 12.7 mm, AlTiN coating

Cylindrical face milling cutters, short, 2 edges across the centre, 30°, NR type, weldon face, diameter 12.7 mm, AlTiN coating

  • High-speed steel HSS Co8
DPR12918
Face cutters, long, 1 cutting edge through the centre, 30°, type HR, weldon flat, diameter 19.1 mm

Face cutters, long, 1 cutting edge through the centre, 30°, type HR, weldon flat, diameter 19.1 mm

  • High-speed steel HSS Co8
DPR14017
Cylindrical face milling cutters, short, 1 cutting edge across the centre, 45°, type N, weldon flat, diameter 12.7 mm

Cylindrical face milling cutters, short, 1 cutting edge across the centre, 45°, type N, weldon flat, diameter 12.7 mm

  • High-speed steel HSS Co8
DPR28017
Tongue groove cutters short, double-toothed, asymmetrical, 30°, type N, weldon flat, diameter 12.7 mm

Tongue groove cutters short, double-toothed, asymmetrical, 30°, type N, weldon flat, diameter 12.7 mm

  • High-speed steel HSS Co8
DPR28018
Tongue groove cutters short, double-toothed, asymmetrical, 30°, type N, weldon flat, diameter 12.7 mm

Tongue groove cutters short, double-toothed, asymmetrical, 30°, type N, weldon flat, diameter 12.7 mm

  • High-speed steel HSS Co8
DPR33008
Angle cutters - face cutters, smooth shank, angle 60°, diameter 16 mm

Angle cutters - face cutters, smooth shank, angle 60°, diameter 16 mm

  • High-speed steel HSS Co8
DPR36018
Quarter-circle concave cutters, weldon flat, diameter 2 mm

Quarter-circle concave cutters, weldon flat, diameter 2 mm

  • High-speed steel HSS Co8
DPR51018
Short copy cutters, two-toothed, 30°, weldon facet, diameter 12.7 mm

Short copy cutters, two-toothed, 30°, weldon facet, diameter 12.7 mm

  • High-speed steel HSS Co8
HMT14505
Machine taps for hand tools with straight groove and breaker, passivation

Machine taps for hand tools with straight groove and breaker, passivation

  • Rychlořezná ocel HSS Co5
  • DIN 371, DIN 376
HMT14505 SET
Set of machine taps for hand tools with straight groove and breaker, passivation

Set of machine taps for hand tools with straight groove and breaker, passivation
HMT20005
Machine taps for hand tools with 45° groove, passivation

Machine taps for hand tools with 45° groove, passivation
HMT20005 SET
Machine tapping set for hand tools with 45° groove

Machine tapping set for hand tools with 45° groove
MT11305
Machine taps with straight flute, pasivation

Machine taps with straight flute, pasivation

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT11305 SET
Set of machine taps + Drills DIN338

Set of machine taps + Drills DIN338

  • High-speed steel HSS-Co5
  • DIN 371, DIN 376
MT11375
Machine taps with straight flute, pasivation

Machine taps with straight flute, pasivation

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT11375 TICN
Machine taps with straight flute, for stainless steel, coating TiCN

Machine taps with straight flute, for stainless steel, coating TiCN

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT11384 SET
Set of machine taps, universal, coating TiCN + Drills DIN338

Set of machine taps, universal, coating TiCN + Drills DIN338

  • High-speed steel HSSE-V3
  • DIN 371, DIN 376
MT11384 TICN
Machine taps with straight flute, universal, coating TiCN

Machine taps with straight flute, universal, coating TiCN

  • High-speed steel HSSE V3
  • DIN 371, DIN 376
MT12305
Machine taps with straight flute, fine metric thread

Machine taps with straight flute, fine metric thread

  • High-speed steel HSS Co5
  • DIN 374
MT21505
Machine taps with spiral flute, 40°, pasivation

Machine taps with spiral flute, 40°, pasivation

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT21505 SET
Set of machine taps, λ 40° + Drills DIN338

Set of machine taps, λ 40° + Drills DIN338

  • High-speed steel HSS-Co5
  • DIN 371, DIN 376
MT21575
Machine taps with spiral flute, 35°, pasivation

Machine taps with spiral flute, 35°, pasivation

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT21575 TICN
Machine taps with spiral flute, 35°, for stainless steel, coating TiCN

Machine taps with spiral flute, 35°, for stainless steel, coating TiCN

  • High-speed steel HSS Co5
  • DIN 371, DIN 376
MT21584 SET
Set of machine taps, universal, λ 40°, coating TiCN + Drills DIN338

Set of machine taps, universal, λ 40°, coating TiCN + Drills DIN338

  • High-speed steel HSSE-V3
  • DIN 371, DIN 376
MT21584 TICN
Machine taps with spiral flute, 40°, universal, coating TiCN

Machine taps with spiral flute, 40°, universal, coating TiCN

  • High-speed steel HSSE V3
  • DIN 371, DIN 376
MT22505
Machine taps with spiral flute 40°, fine metric thread

Machine taps with spiral flute 40°, fine metric thread

  • High-speed steel HSS Co5
  • DIN 374
S10012 TiAlN
Straight shank twist drills, jobbers series, 5xD, coating TiAlN

Straight shank twist drills, jobbers series, 5xD, coating TiAlN

  • Solid carbide (SC)
  • DIN 6537L
S100402 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S100412 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S100502
End mills short, 1 tooth cut over centre, 25°, type N, plain shank

End mills short, 1 tooth cut over centre, 25°, type N, plain shank

  • Solid carbide (SC)
S100602
End mills short, 1 tooth cut over centre, 30°, type N, plain shank

End mills short, 1 tooth cut over centre, 30°, type N, plain shank

  • Solid carbide (SC)
S10122
Solid carbide drills with coolant holes, 5xD, coating AlTiN

Solid carbide drills with coolant holes, 5xD, coating AlTiN

  • Solid carbide (SC)
  • DIN 6537L
S10132 ZrN
Solid carbide drills with coolant holes, 5xD, type W, coating ZrN

Solid carbide drills with coolant holes, 5xD, type W, coating ZrN

  • Solid carbide (SC)
S101402 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S101412 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S10222 AlTiN
Solid carbide drills with coolant holes, 5xD, coating AlTiN

Solid carbide drills with coolant holes, 5xD, coating AlTiN

  • Solid carbide (SC)
  • DIN 6537L
S102402 AlCrN
End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlCrN

End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S102402R AlCrN
End mills long with corner radius, 1 tooth cut over centre, 30°, type N, plain shank, coating AlCrN

End mills long with corner radius, 1 tooth cut over centre, 30°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S109602 AlTiN
End mills long, 2 teeth cut to centre, 20°, type HR, plain shank, coating AlTiN

End mills long, 2 teeth cut to centre, 20°, type HR, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S109612 AlTiN
End mills long, 2 teeth cut to centre, 20°, type HR, Weldon shank, coating AlTiN

End mills long, 2 teeth cut to centre, 20°, type HR, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S111402
End mills long, 1 tooth cut over centre, 45°, type W, plain shank

End mills long, 1 tooth cut over centre, 45°, type W, plain shank

  • Solid carbide (SC)
S111402N
End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank, coating CrN

End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank, coating CrN

  • Solid carbide (SC)
S111402R ZRN
End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, plain shank, coating ZrN

End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, plain shank, coating ZrN

  • Solid carbide (SC)
S111412
End mills long, 1 tooth cut over centre, 45°, type W, Weldon shank

End mills long, 1 tooth cut over centre, 45°, type W, Weldon shank

  • Solid carbide (SC)
S111412N
End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank, coating CrN

End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank, coating CrN

  • Solid carbide (SC)
S111412R ZRN
End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, Weldon shank, coating ZrN

End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, Weldon shank, coating ZrN

  • Solid carbide (SC)
S111502
End mills long, 2 teeth cut to centre, 38°, type W, plain shank

End mills long, 2 teeth cut to centre, 38°, type W, plain shank

  • Solid carbide (SC)
S111512
End mills long, 2 teeth cut to centre, 38°, type W, Weldon shank

End mills long, 2 teeth cut to centre, 38°, type W, Weldon shank

  • Solid carbide (SC)
S111602
End mills long, 2 teeth cut to centre, 45°, type W, plain shank

End mills long, 2 teeth cut to centre, 45°, type W, plain shank

  • Solid carbide (SC)
S111612
End mills long, 2 teeth cut to centre, 45°, type W, Weldon shank

End mills long, 2 teeth cut to centre, 45°, type W, Weldon shank

  • Solid carbide (SC)
S111702 AlCrN
End mills long, λ 45°, type NR, plain shank, coating AlCrN

End mills long, λ 45°, type NR, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527
S111712 AlCrN
End mills long, λ 45°, type NR, weldon shank, coating AlCrN

End mills long, λ 45°, type NR, weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527
S112402L
End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank

End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank

  • Solid carbide (SC)
S112402LR
End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, plain shank

End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, plain shank

  • Solid carbide (SC)
S112402R ZRN
End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank, coating ZrN

End mills long, 1 tooth cut over cntre, 44°-46°, type W, plain shank, coating ZrN

  • Solid carbide (SC)
S112412L
End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank

End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank

  • Solid carbide (SC)
S112412LR
End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, Weldon shank

End mills long with corner radius, 1 tooth cut over centre, 44°-46°, type W, Weldon shank

  • Solid carbide (SC)
S112412R ZrN
End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank, coating ZrN

End mills long, 1 tooth cut over cntre, 44°-46°, type W, Weldon shank, coating ZrN

  • Solid carbide (SC)
S113602 AlTiN
End mills long, 2 teeth cut to centre, 45°, typ CB, plain shank, coating AlTiN

End mills long, 2 teeth cut to centre, 45°, typ CB, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S113612 AlTiN
End mills long, 2 teeth cut to centre, 45°, typ CB, Weldon shank, coating AlTiN

End mills long, 2 teeth cut to centre, 45°, typ CB, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S115402
End mills long, 1 tooth cut over centre, 25°, type WR, plain shank

End mills long, 1 tooth cut over centre, 25°, type WR, plain shank

  • Solid carbide (SC)
S115412
End mills long, 1 tooth cut over centre, 25°, type WR, Weldon shank

End mills long, 1 tooth cut over centre, 25°, type WR, Weldon shank

  • Solid carbide (SC)
S118602N AlCrN
End mills short, 45°, type HR, plain shank, coating AlCrN

End mills short, 45°, type HR, plain shank, coating AlCrN

  • Solid carbide (SC)
S118612N AlCrN
End mills short, 45°, type HR, Weldon shank, coating AlCrN

End mills short, 45°, type HR, Weldon shank, coating AlCrN

  • Solid carbide (SC)
S119602 AlTiN
End mills long, 45°, type HR, plain shank, coating AlTiN

End mills long, 45°, type HR, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S119602N AlCrN
End mills long, 2 teeth cut to centre, 45°, type HR, plain shank, coating AlCrN

End mills long, 2 teeth cut to centre, 45°, type HR, plain shank, coating AlCrN

  • Solid carbide (SC)
S119612 AlTiN
End mills long, 45°, type HR, Weldon shank, coating AlTiN

End mills long, 45°, type HR, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S119612N AlCrN
End mills long, 2 teeth cut to centre, 45°, type HR, Weldon shank, coating AlCrN

End mills long, 2 teeth cut to centre, 45°, type HR, Weldon shank, coating AlCrN

  • Solid carbide (SC)
S120402 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S120412 AlTiN
End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S120602 AlTiN
End mills short, 2 teeth cut to centre, 30°, type N, plain shank, coating AlTiN

End mills short, 2 teeth cut to centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S120612 AlTiN
End mills short, 2 teeth cut to centre, 30°, type N, Weldon shank, coating AlTiN

End mills short, 2 teeth cut to centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S120702R TiSiN
End mills short with corner radius, λ 30°, type H, plain shank, coating TiSiN

End mills short with corner radius, λ 30°, type H, plain shank, coating TiSiN

  • Solid carbide (SC)
  • DIN 6527
S121402 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S121412 AlTiN
End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S121602 AlTiN
End mills long, 2 teeth cut to centre, 30°, type N, plain shank, coating AlTiN

End mills long, 2 teeth cut to centre, 30°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S121612 AlTiN
End mills long, 2 teeth cut to centre, 30°, type N, Weldon shank, coating AlTiN

End mills long, 2 teeth cut to centre, 30°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S122502T AlCrN
End mills short for trochoidal milling, λ 37°/30°, type CB, plain shank, coating AlCrN

End mills short for trochoidal milling, λ 37°/30°, type CB, plain shank, coating AlCrN

  • Solid carbide (SC)
S122512T AlCrN
End mills short for trochoidal milling, λ 37°/30°, type CB, weldon shank, coating AlCrN

End mills short for trochoidal milling, λ 37°/30°, type CB, weldon shank, coating AlCrN

  • Solid carbide (SC)
S123502T AlCrN
End mills long, 37°-38°, trochiodal milling, type CB, plain shank, coating AlCrN

End mills long, 37°-38°, trochiodal milling, type CB, plain shank, coating AlCrN

  • Solid carbide (SC)
S123512T AlCrN
End mills long, 37°-38°, trochiodal milling, type CB, Weldon shank, coating AlCrN

End mills long, 37°-38°, trochiodal milling, type CB, Weldon shank, coating AlCrN

  • Solid carbide (SC)
S131602 AlTiN
End mills long, fine teeth, 45°, type H, plain shank, coating AlTiN

End mills long, fine teeth, 45°, type H, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S131602E AlTiN
End mills extrax long, fine teeth, 45°, type H, plain shank, coating AlTiN

End mills extrax long, fine teeth, 45°, type H, plain shank, coating AlTiN

  • Solid carbide (SC)
S131602L AlTiN
End mills extra long, fine teeth, 45°, type H, plain shank, coating AlTiN

End mills extra long, fine teeth, 45°, type H, plain shank, coating AlTiN

  • Solid carbide (SC)
S131612 AlTiN
End mills long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

End mills long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S131612E AlTiN
End mills extrax long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

End mills extrax long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

  • Solid carbide (SC)
S131612L AlTiN
End mills extra long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

End mills extra long, fine teeth, 45°, type H, Weldon shank, coating AlTiN

  • Solid carbide (SC)
S140402 AlTiN
End mills short, 1 tooth cut over centre, 45°, type N, plain shank, coating AlTiN

End mills short, 1 tooth cut over centre, 45°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S140412 AlTiN
End mills short, 1 tooth cut over centre, 45°, type N, Weldon shank, coating AlTiN

End mills short, 1 tooth cut over centre, 45°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S140602N AlCrN
End mills short, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

End mills short, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527K
S140612N AlCrN
End mills short, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

End mills short, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527K
S141402 AlTiN
End mills long, 1 tooth cut over centre, 45°, type N, plain shank, coating AlTiN

End mills long, 1 tooth cut over centre, 45°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S141402X AlCrN
End mills long, 1 tooth cut over centre, 37°-39°, type N, plain shank, cating AlCrN

End mills long, 1 tooth cut over centre, 37°-39°, type N, plain shank, cating AlCrN

  • Solid carbide (SC)
S141412 AlTiN
End mills long, 1 tooth cut over centre, 45°, type N, Weldon shank, coating AlTiN

End mills long, 1 tooth cut over centre, 45°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S141412X AlCrN
End mills long, 1 tooth cut over centre, 37°-39°, type N, weldon shank, cating AlCrN

End mills long, 1 tooth cut over centre, 37°-39°, type N, weldon shank, cating AlCrN

  • Solid carbide (SC)
S141602N AlCrN
End mills long, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

End mills long, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S141602R AlCrN
End mills long with corner radius, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

End mills long with corner radius, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S141602X AlTiN
End mills long, 2 teeth cut to centre, 35°–38°, type N, plain shank, coating AlTiN

End mills long, 2 teeth cut to centre, 35°–38°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S141612N AlCrN
End mills long, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

End mills long, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S141612R AlCrN
End mills long with corner radius, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

End mills long with corner radius, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S141612X AlTiN
End mills long, 2 teeth cut to centre, 35°–38°, type N, Weldon shank, coating AlTiN

End mills long, 2 teeth cut to centre, 35°–38°, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S143502T AlCr
End mills long, 41°-42°, type T, plain shank, coating AlCr

End mills long, 41°-42°, type T, plain shank, coating AlCr

  • Solid carbide (SC)
S143512T AlCr
End mills long, 41°-42°, type T, Weldon shank, coating AlCr

End mills long, 41°-42°, type T, Weldon shank, coating AlCr

  • Solid carbide (SC)
S151602 AlCr
End mills long, 2 teeth cut to centre, 40°-42°, type N, plain shank, coating AlCr

End mills long, 2 teeth cut to centre, 40°-42°, type N, plain shank, coating AlCr

  • Solid carbide (SC)
  • DIN 6527L
S151602R AlCr
End mills long with corner radius, 2 teeth cut to centre, 40°-42°, type N, plain shank, coating AlCr

End mills long with corner radius, 2 teeth cut to centre, 40°-42°, type N, plain shank, coating AlCr

  • Solid carbide (SC)
  • DIN 6527L
S151612 AlCr
End mills long, 2 teeth cut to centre, 40°-42°, type N, Weldon shank, coating AlCr

End mills long, 2 teeth cut to centre, 40°-42°, type N, Weldon shank, coating AlCr

  • Solid carbide (SC)
  • DIN 6527L
S151612R AlCr
End mills long with corner radius, 2 teeth cut to centre, 40°-42°, type N, Weldon shank, coating AlCr

End mills long with corner radius, 2 teeth cut to centre, 40°-42°, type N, Weldon shank, coating AlCr

  • Solid carbide (SC)
  • DIN 6527L
S151702 AlCrN
End mills long, fine teeth, 45°, type HPC, plain shank, coating AlCrN

End mills long, fine teeth, 45°, type HPC, plain shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S151702R AlCrN
End mills extra long, fine teeth, 50°-35°, type H, plain shank

End mills extra long, fine teeth, 50°-35°, type H, plain shank

  • Solid carbide (SC)
S151702R TiSiN
End mills short with corner radius, fine teeth, λ 50°, type H, plain shank, coating TiSiN

End mills short with corner radius, fine teeth, λ 50°, type H, plain shank, coating TiSiN

  • Solid carbide (SC)
  • DIN 6527
S151712 AlCrN
End mills long, fine teeth, 45°, type HPC, weldon shank, coating AlCrN

End mills long, fine teeth, 45°, type HPC, weldon shank, coating AlCrN

  • Solid carbide (SC)
  • DIN 6527L
S151712R
End mills extra long, fine teeth, 50°-35°, type H, Weldon shank

End mills extra long, fine teeth, 50°-35°, type H, Weldon shank

  • Solid carbide (SC)
S152502R AlCrN
End mills long with corner radius, 44°-45°, type N, plain shank, coating AlCrN

End mills long with corner radius, 44°-45°, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
S152512R AlCrN
End mills long with corner radius, 44°-45°, type N, Weldon shank, coating AlCrN

End mills long with corner radius, 44°-45°, type N, Weldon shank, coating AlCrN

  • Solid carbide (SC)
S152602 AlCr
End mills long, 55°, type N, plain shank, coating AlCr

End mills long, 55°, type N, plain shank, coating AlCr

  • Solid carbide (SC)
S152612 AlCr
End mills long, 55°, type N, Weldon shank, coating AlCr

End mills long, 55°, type N, Weldon shank, coating AlCr

  • Solid carbide (SC)
S16012
Mini drills

Mini drills

  • Solid carbide (SC)
  • DIN 1899
S171502
End mills short, 1 tooth cut over centre, left helix, 20°, type N, plain shank

End mills short, 1 tooth cut over centre, left helix, 20°, type N, plain shank

  • Solid carbide (SC)
S20122 TiAlN
Solid carbide drills with coolant holes, 8xD, coating TiAlN

Solid carbide drills with coolant holes, 8xD, coating TiAlN

  • Solid carbide (SC)
S260402 AlTiN
Mini sinking cutters, type N, plain shank, coating AlTiN

Mini sinking cutters, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
S30112 TiAlN
Solid carbide drills, 3xD, coating TiAlN

Solid carbide drills, 3xD, coating TiAlN

  • Solid carbide (SC)
  • DIN 6537K
S350002 AlTiN
Chamfer end mills, 90°, 60°, type N, Weldon shank

Chamfer end mills, 90°, 60°, type N, Weldon shank

  • Solid carbide (SC)
S350102 AlTiN
Chamfer end mills, 60°, 90°, type N, plain shank, coating AlTiN

Chamfer end mills, 60°, 90°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
S360002 AlTiN
Corner rounding concave cutters, type N, Weldon shank

Corner rounding concave cutters, type N, Weldon shank

  • Solid carbide (SC)
S390002
Multifuncion end mills, 90°, type N, plain shank

Multifuncion end mills, 90°, type N, plain shank

  • Solid carbide (SC)
S390002 AlTiN
Multifuncion end mills, 90°, type N, plain shank, coating AlTiN

Multifuncion end mills, 90°, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
S50102
Solid carbide NC-spotting drills 90°

Solid carbide NC-spotting drills 90°

  • Solid carbide (SC)
S50102 AlTiN
Solid carbide drills, AlTiN

Solid carbide drills, AlTiN

  • Solid carbide (SC)
S50112
Solid carbide NC-spotting drills 120°

Solid carbide NC-spotting drills 120°

  • Solid carbide (SC)
S510602 AlTiN
Ball nose end mills short, 2-fluted, type N, plain shank, coating AlTiN

Ball nose end mills short, 2-fluted, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S510612 AlTiN
Ball nose end mills short, 2-fluted, type N, Weldon shank, coating AlTiN

Ball nose end mills short, 2-fluted, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527K
S511602 AlTiN
Ball nose end mills long, 2-fluted, type N, plain shank, coating AlTiN

Ball nose end mills long, 2-fluted, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S511602E AlCrN
Extra long ball nose end mills, type N, plain shank, coating AlCrN

Extra long ball nose end mills, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
S511612 AlTiN
Ball nose end mills long, 2-fluted, type N, Weldon shank, coating AlTiN

Ball nose end mills long, 2-fluted, type N, Weldon shank, coating AlTiN

  • Solid carbide (SC)
  • DIN 6527L
S511702 TiSiN
Die sinking short, 2-fluted, λ 15°, type H, plain shank, coating TiSiN

Die sinking short, 2-fluted, λ 15°, type H, plain shank, coating TiSiN

  • Solid carbide (SC)
S531602E AlCrN
Extra long ball nose end mills, type N, plain shank, coating AlCrN

Extra long ball nose end mills, type N, plain shank, coating AlCrN

  • Solid carbide (SC)
S560602 AlTiN
Mini sinking cutters, type N, plain shank, coating AlTiN

Mini sinking cutters, type N, plain shank, coating AlTiN

  • Solid carbide (SC)
S60122 TiAlN
Solid carbide drills with coolant holes, 12xD

Solid carbide drills with coolant holes, 12xD

  • Solid carbide (SC)
S70112 AlTiN
Extra long twist drills with inner cooling, 15xD, coating AlTiN

Extra long twist drills with inner cooling, 15xD, coating AlTiN

  • Solid carbide (SC)
S80112 AlTiN
Extra long twist drills with inner cooling, 20xD, coating AlTiN

Extra long twist drills with inner cooling, 20xD, coating AlTiN

  • Solid carbide (SC)
S90112 AlTiN
Extra long twist drills with inner cooling, 25xD, coating AlTiN

Extra long twist drills with inner cooling, 25xD, coating AlTiN

  • Solid carbide (SC)
T1002MX
Solid carbide rotary burrs, type ZYA-S, cutting profile MX

Solid carbide rotary burrs, type ZYA-S, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/ZYA-S
T1002MY
Solid carbide rotary burrs, type ZYA-S, cutting profile MY

Solid carbide rotary burrs, type ZYA-S, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/ZYA-S
T1102MX
Solid carbide rotary burrs, type WRC, cutting profile MX

Solid carbide rotary burrs, type WRC, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/WRC
T1102MY
Solid carbide rotary burrs, type WRC, cutting profile MY

Solid carbide rotary burrs, type WRC, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/WRC
T1202MX
Solid carbide rotary burrs, type SPG, cutting profile MX

Solid carbide rotary burrs, type SPG, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/SPG
T1202MY
Solid carbide rotary burrs, type SPG, cutting profile MY

Solid carbide rotary burrs, type SPG, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/SPG
T1302MX
Solid carbide rotary burrs, type RBF, cutting profile MX

Solid carbide rotary burrs, type RBF, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/RBF
T1302MY
Solid carbide rotary burrs, type RBF, cutting profile MY

Solid carbide rotary burrs, type RBF, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/RBF
T1402MX
Solid carbide rotary burrs, type KUD, cutting profile MX

Solid carbide rotary burrs, type KUD, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/KUD
T1402MY
Solid carbide rotary burrs, type KUD cutting profile MY

Solid carbide rotary burrs, type KUD cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/KUD
T1502MX
Solid carbide rotary burrs, type SKM, cutting profile MX

Solid carbide rotary burrs, type SKM, cutting profile MX

  • Solid carbide (SC)
  • ~DIN 8033/SKM
T1502MY
Solid carbide rotary burrs, type SKM, cutting profile MY

Solid carbide rotary burrs, type SKM, cutting profile MY

  • Solid carbide (SC)
  • ~DIN 8033/SKM
T1X02 SET
Set of solid carbide rotary burrs, cutting profile MX

Set of solid carbide rotary burrs, cutting profile MX

  • Solid carbide (SC)
T2002
Contour end mills for plastics, type W, plain shank

Contour end mills for plastics, type W, plain shank

  • Solid carbide (SC)
T2012
Contour end mills for plastics, type W, plain shank

Contour end mills for plastics, type W, plain shank

  • Solid carbide (SC)
VK10010
Tapper shank drills, jobber series, pasivation

Tapper shank drills, jobber series, pasivation

  • High-speed steel HSS
  • DIN 345
VK10010 SET
Set of tapper shank drills, jobber series, diameter 14,5-30 mm, pasivation, 9 pcs

Set of tapper shank drills, jobber series, diameter 14,5-30 mm, pasivation, 9 pcs

  • High-speed steel HSS
  • DIN 345
VK10015
Tapper shank drills, jobber series

Tapper shank drills, jobber series

  • High-speed steel HSS Co5
  • DIN 345
VK10015 SET
Set of tapper shank drills, jobber series, diameter 14,5-30 mm, 9 pcs

Set of tapper shank drills, jobber series, diameter 14,5-30 mm, 9 pcs

  • High-speed steel HSS Co5
  • DIN 345
VK10028
Tapper shank drills for hard machined materials, pasivation

Tapper shank drills for hard machined materials, pasivation

  • High-speed steel HSS Co8
VK60010
Tapper shank drills, extra long series

Tapper shank drills, extra long series

  • High-speed steel HSS
  • DIN 341
VK60045
Tapper shank drills, extra long series, type T100

Tapper shank drills, extra long series, type T100

  • High-speed steel HSS Co5
  • DIN 341
VK70010
Tapper shank drills, extra long series

Tapper shank drills, extra long series

  • High-speed steel HSS
  • DIN 1870
VK70045
Tapper shank drills, extra long series, type T100

Tapper shank drills, extra long series, type T100

  • High-speed steel HSS Co5
  • DIN 1870
VK80010
Tapper shank drills, extra long series

Tapper shank drills, extra long series

  • High-speed steel HSS
  • DIN 1870
VN10010
Parallel shank twist drills - jobber series

Parallel shank twist drills - jobber series

  • High-speed steel HSS
  • DIN 338
VN10010 SET
Set of parallel shank twist drills - jobber series

Set of parallel shank twist drills - jobber series

  • High-speed steel HSS
  • DIN 338
VN10010 TIN
Parallel shank twist drills - jobber series, coating TiN

Parallel shank twist drills - jobber series, coating TiN

  • High-speed steel HSS
  • DIN 338
VN10010 TIN SET
Set of parallel shank twist drills - jobber series, TiN coating

Set of parallel shank twist drills - jobber series, TiN coating

  • High-speed steel HSS
  • DIN 338
VN10015
Parallel shank twist drills - jobber series

Parallel shank twist drills - jobber series

  • High-speed steel HSS Co5
  • DIN 338
VN10015 SET
Drills with cylindrical shank, standard

Drills with cylindrical shank, standard
VN10015 TiN
Straight shank twist drills, jobbers series, 5xD, coating TIN

Straight shank twist drills, jobbers series, 5xD, coating TIN

  • High-speed steel HSS-Co5
  • DIN 338
VN10015 TIN SET
Drill bits with cylindrical shank, standard, TIN coating

Drill bits with cylindrical shank, standard, TIN coating
VN10018
Parallel shank twist drills, jobber series

Parallel shank twist drills, jobber series

  • High-speed steel HSS Co8
  • DIN 338
VN10030
Parallel shank twist drills - jobber series, type W

Parallel shank twist drills - jobber series, type W

  • High-speed steel HSS
  • DIN 338
VN10045
Parallel shank twist drills - jobber series, type T100

Parallel shank twist drills - jobber series, type T100

  • High-speed steel HSS Co5
  • DIN 338
VN10085
Parallel shank twist drills - jobber series, type Ti

Parallel shank twist drills - jobber series, type Ti

  • High-speed steel HSS Co5
  • DIN 338
VN10085 SET
Set of parallel shank twist drills - jobber series, type Ti

Set of parallel shank twist drills - jobber series, type Ti

  • High-speed steel HSS Co5
  • DIN 338
VN10085 TiAlN
Straight shank twist drills, jobbers series, 5xD, type Ti, coating TiAlN

Straight shank twist drills, jobbers series, 5xD, type Ti, coating TiAlN

  • High-speed steel HSS-Co5
  • DIN 338
VN10920
RS drill, for general purpose, type WN

RS drill, for general purpose, type WN

  • High-speed steel HSS
  • DIN 338
VN10920 SET
Set of RS drill, for general purpose, type WN

Set of RS drill, for general purpose, type WN

  • High-speed steel HSS
  • DIN 338
VN13015
Drills with cylindrical shank, three-tooth

Drills with cylindrical shank, three-tooth
VN20010
Parallel shank twist drills, long series

Parallel shank twist drills, long series

  • High-speed steel HSS
  • DIN 340
VN20015
Parallel shank twist drills, long series

Parallel shank twist drills, long series

  • High-speed steel HSS Co5
  • DIN 340
VN20045
Parallel shank twist drills, long series, type T100

Parallel shank twist drills, long series, type T100

  • High-speed steel HSS Co5
  • DIN 340
VN30010
Parallel shank twist drills, stub series

Parallel shank twist drills, stub series

  • High-speed steel HSS
  • DIN 1897
VN30045
Parallel shank twist drills, stub series, type V120

Parallel shank twist drills, stub series, type V120

  • High-speed steel HSS Co5
  • DIN 1897
VN30225
Twist drills for welding spots

Twist drills for welding spots

  • High-speed steel HSS Co5
VN40090
Double ended body drills

Double ended body drills

  • High-speed steel HSS
VN40225
Double ended twist drills for welding spots

Double ended twist drills for welding spots

  • High-speed steel HSS
VN50105
NC-spotting drills 90°

NC-spotting drills 90°

  • High-speed steel HSS Co5
VN50105 TiN
NC-spotting drills 90°, coating TiN

NC-spotting drills 90°, coating TiN

  • High-speed steel HSS Co5
VN50115
NC-spotting drills 120°

NC-spotting drills 120°

  • High-speed steel HSS Co5
VN50115 TiN
NC-spotting drills 120°, coating TiN

NC-spotting drills 120°, coating TiN

  • High-speed steel HSS Co5
VN51105
NC-spotting drills 90° long

NC-spotting drills 90° long

  • High-speed steel HSS Co5
VN51115
NC-spotting drills 120° long

NC-spotting drills 120° long

  • High-speed steel HSS Co5
VN60010
Parallel shank twist drills, extra long series

Parallel shank twist drills, extra long series

  • High-speed steel HSS
  • DIN 1869
VN60045
Parallel shank twist drills, extra long series,type T100

Parallel shank twist drills, extra long series,type T100

  • High-speed steel HSS Co5
  • DIN 1869
VN70010
Parallel shank twist drills, extra long series

Parallel shank twist drills, extra long series

  • High-speed steel HSS
  • DIN 1869
VN70045
Parallel shank twist drills, extra long series,type T100

Parallel shank twist drills, extra long series,type T100

  • High-speed steel HSS Co5
  • DIN 1869
VN80010
Parallel shank twist drills, extra long series

Parallel shank twist drills, extra long series

  • High-speed steel HSS
  • DIN 1869
VN80045
Parallel shank twist drills, extra long series,type T100

Parallel shank twist drills, extra long series,type T100

  • High-speed steel HSS Co5
  • DIN 1869
VS92010
Centre drills 60°, form A

Centre drills 60°, form A

  • High-speed steel HSS
  • DIN 333A
VS92012
Centre drills SC 60° form A

Centre drills SC 60° form A

  • Solid carbide (SC)
VS92015
Centre drills 60°, form A

Centre drills 60°, form A

  • High-speed steel HSS Co5
  • DIN 333A
VS92115
Centre drills 60° long, form A

Centre drills 60° long, form A

  • High-speed steel HSS Co5
  • DIN 333A
VS93010
Centre drills 60°, form R

Centre drills 60°, form R

  • High-speed steel HSS
  • DIN 333R
VS94010
Stepped drills

Stepped drills

  • High-speed steel HSS
VS94015
Stepped drills

Stepped drills

  • High-speed steel HSS Co5
VS94015 TIALN
Stepped drill bits with helical groove, TIALN

Stepped drill bits with helical groove, TIALN

  • High-speed steel HSS Co5
VS95015
Centre drills for threads, form DA

Centre drills for threads, form DA

  • High-speed steel HSS Co5
  • DIN 332/2
2025 © ZPS-FN a.s. | All right reserved
webdesign by Studio 9