End mills short, 2 teeth cut to centre, 35°-38°, type N, Weldon shank, coating AlCrN
h 10
h 6
l1 l2 Dn Z lnItem codeOn stock
365052,849S140612N.030 No
3,565063,3410S140612N.035 No
465483,8413S140612N.040 Yes
4,565484,3415S140612N.045 No
565494,8416S140612N.050 Yes
6654105,7417S140612N.060 Yes
8858127,8422S140612N.080 Yes
101066149,5426S140612N.100 Yes
1212731611,5428S140612N.120 Yes
1414751813,5430S140612N.140 Yes
1616822215,5434S140612N.160 Yes
1818842417,5436S140612N.180 Yes
2020922619,5442S140612N.200 No

Cutting conditions





Ø 3

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²1,5xD0,3xD2100.0150.
P.3 | Tool steels low alloyed≤ 1100 N/mm²1,5xD0,3xD1750.0150.
P.5 | Tool steels high alloyed≤ 1100 N/mm²1,5xD0,3xD1200.0150.
M.1 | Corrosion- and acid-proof steels≤ 750 N/mm²1,5xD0,3xD1100.0150.
M.2 | Corrosion- and acid-proof steels750 - 850 N/mm²1,5xD0,3xD900.0150.
K.1 | Cast iron≤ 820 N/mm²1,5xD0,3xD1500.0150.
K.2 | Cast iron> 800 N/mm²1,5xD0,3xD1100.0150.
S.1 | Chrome-nickel alloys≤ 1500 N/mm²1,5xD0,3xD500.0150.
S.1 | Titanium, titanium alloys≤ 1250 N/mm²1,5xD0,3xD700.0150.
H.1 | Hardened materials≤ 1920 N/mm²1,5xD0,3xD1200.0150.
H.2 | Hardened materials1920 - 2210 N/mm²1,5xD0,3xD1000.0150.

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Tool geometry

Tool geometry

more +
Helix angle = 35/38°. Rake angle = 10°.
End face design

End face design

AlCrN coating

AlCrN coating

more +
Coating with very high wear resistance and excellent hot hardness.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

Solid carbide

Solid carbide

Air cooling

Air cooling