S131612 Solid carbide (SC) DIN 6527 L
Clamping element
Type H
Tool geometry
Feed direction possibility
End face design
Solid carbide
Coating AlTiN
Oil coolant.
End mills long, fine teeth, 45°, type H, Weldon shank
D
h 10
d
h 6
l1 l2 Z Item code On stock
6 6 57 13 6 S131612.060 Yes
8 8 63 19 6 S131612.080 Yes
10 10 72 22 6 S131612.100 Yes
12 12 83 26 6 S131612.120 Yes
14 14 83 26 6 S131612.140 Yes
16 16 92 32 6 S131612.160 Yes
18 18 92 32 8 S131612.180 Yes
20 20 104 38 8 S131612.200 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1,75xD 0,5XD 180 0.03 0.04 0.05 0.06 0.08 0.09 0.1
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1,75xD 0,5XD 100 0.03 0.04 0.05 0.06 0.08 0.09 0.1
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1,75xD 0,5XD 80 0.03 0.04 0.05 0.06 0.08 0.09 0.1
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 1,75xD 0,5XD 90 0.03 0.04 0.05 0.06 0.08 0.09 0.1
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1,75xD 0,5XD 80 0.03 0.04 0.05 0.06 0.08 0.09 0.1
K.1 | Cast iron < 240 HB 1,75xD 0,5XD 140 0.03 0.04 0.05 0.06 0.08 0.09 0.1
K.2 | Cast iron > 240 HB 1,75xD 0,5XD 100 0.03 0.04 0.05 0.06 0.08 0.09 0.1
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 1,75xD 0,5XD 50 0.03 0.04 0.05 0.06 0.08 0.09 0.1
H.1 | Hardened materials < 54 HRC 1,75xD 0,5XD 80 0.03 0.04 0.05 0.06 0.08 0.09 0.1

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Tool geometry

Tool geometry

more +
Helix angle = 45°. Rake angle = 12°.
End face design

End face design

Coating AlTiN

Coating AlTiN

more +
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.
Type H

Type H

more +
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
Feed direction possibility

Feed direction possibility

Solid carbide

Solid carbide

Oil coolant.

Oil coolant.