End mills long, 41°-42°, type T, Weldon shank, coating AlCr
| D e 8 | d h 5 | l1 | l2 | l3 | Dn | R | Z | Item code | On stock |
|---|---|---|---|---|---|---|---|---|---|
| 6 | 6 | 62 | 18 | 24 | 5,7 | 5 | S143512T.060 AlCr | No | |
| 6 | 6 | 62 | 18 | 24 | 5,7 | 0,5 | 5 | S143512T.06005 AlCr | No |
| 6 | 6 | 62 | 18 | 24 | 5,7 | 1 | 5 | S143512T.06010 AlCr | No |
| 8 | 8 | 68 | 24 | 30 | 7,6 | 5 | S143512T.080 AlCr | No | |
| 8 | 8 | 68 | 24 | 30 | 7,6 | 0,5 | 5 | S143512T.08005 AlCr | No |
| 8 | 8 | 68 | 24 | 30 | 7,6 | 1 | 5 | S143512T.08010 AlCr | No |
| 10 | 10 | 80 | 30 | 38 | 9,5 | 5 | S143512T.100 AlCr | No | |
| 10 | 10 | 80 | 30 | 38 | 9,5 | 0,5 | 5 | S143512T.10005 AlCr | Yes |
| 10 | 10 | 80 | 30 | 38 | 9,5 | 1 | 5 | S143512T.10010 AlCr | No |
| 10 | 10 | 80 | 30 | 38 | 9,5 | 2 | 5 | S143512T.10020 AlCr | No |
| 12 | 12 | 93 | 36 | 46 | 11,5 | 5 | S143512T.120 AlCr | No | |
| 12 | 12 | 93 | 36 | 46 | 11,5 | 0,5 | 5 | S143512T.12005 AlCr | Yes |
| 12 | 12 | 93 | 36 | 46 | 11,5 | 1 | 5 | S143512T.12010 AlCr | No |
| 12 | 12 | 93 | 36 | 46 | 11,5 | 2 | 5 | S143512T.12020 AlCr | No |
| 16 | 16 | 108 | 48 | 58 | 15,5 | 5 | S143512T.160 AlCr | No | |
| 16 | 16 | 108 | 48 | 58 | 15,5 | 0,5 | 5 | S143512T.16005 AlCr | No |
| 16 | 16 | 108 | 48 | 58 | 15,5 | 1 | 5 | S143512T.16010 AlCr | Yes |
| 16 | 16 | 108 | 48 | 58 | 15,5 | 2 | 5 | S143512T.16020 AlCr | No |
| 20 | 20 | 126 | 60 | 74 | 19,5 | 5 | S143512T.200 AlCr | Yes | |
| 20 | 20 | 126 | 60 | 74 | 19,5 | 1 | 5 | S143512T.20010 AlCr | No |
| 20 | 20 | 126 | 60 | 74 | 19,5 | 2 | 5 | S143512T.20020 AlCr | No |
| 20 | 20 | 126 | 60 | 74 | 19,5 | 3 | 5 | S143512T.20030 AlCr | Yes |
| 25 | 25 | 150 | 75 | 92 | 24 | 5 | S143512T.250 AlCr | No |
Cutting conditions
Material | Strength | Ap | Ae | Vc | fz(mm/z) Ø 6 | Ø 8 | Ø 10 | Ø 12 | Ø 14 | Ø 16 | Ø 18 | Ø 20 | Ø 25 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² | 3xD | 0,06xD | 190 | 0.072 | 0.096 | 0.12 | 0.144 | 0.168 | 0.192 | 0.216 | 0.24 | 0.3 |
| M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 3xD | 0,06xD | 170 | 0.072 | 0.096 | 0.12 | 0.144 | 0.168 | 0.192 | 0.216 | 0.24 | 0.3 |
| S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 3xD | 0,06xD | 80 | 0.072 | 0.096 | 0.12 | 0.144 | 0.168 | 0.192 | 0.216 | 0.24 | 0.3 |
| S.2 | Titanium, Titanium alloys | ≤ 1250 N/mm² | 3xD | 0,06xD | 130 | 0.072 | 0.096 | 0.12 | 0.144 | 0.168 | 0.192 | 0.216 | 0.24 | 0.3 |
Calculations of cutting conditions
Product attributes
Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Helix angle = 41/42°. Rake angle = 10°.
End face design
Oil coolant.
AlCr coating
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility
End face design - radius
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.