End mills long, 2 teeth cut to centre, 45°, type HR, Weldon shank
D
h 10
d
h 6
l1 l2 Dn ln Z Item code On stock
4 6 57 11 3,8 16 3 S119612N.040 Yes
5 6 57 13 4,8 18 4 S119612N.050 Yes
6 6 57 13 5,7 19 4 S119612N.060 Yes
8 8 63 19 7,6 25 4 S119612N.080 Yes
10 10 72 22 9,5 30 4 S119612N.100 Yes
12 12 83 26 11,5 36 4 S119612N.120 Yes
14 14 83 26 13,5 36 4 S119612N.140 Yes
16 16 92   15,5 42 4 S119612N.160 Yes
16 16 92 32 15,5 42 5 S119612N.160Z5 Yes
18 18 92 32 17,5 42 5 S119612N.180 No
20 20 104 38 19,5 52 5 S119612N.200 Yes
20 20 104 38 19,5 52 6 S119612N.200Z6 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1,5xD 0,4xD 210 0.03 0.04 0.055 0.065 0.085 0.1 0.11
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1,5xD 0,4xD 175 0.03 0.04 0.055 0.065 0.085 0.1 0.11
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1,5xD 0,4xD 120 0.03 0.04 0.055 0.065 0.085 0.1 0.11
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 1,5xD 0,4xD 110 0.03 0.04 0.055 0.065 0.085 0.1 0.11
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1,5xD 0,4xD 90 0.03 0.04 0.055 0.065 0.085 0.1 0.11
K.1 | Cast iron < 240 HB 1,5xD 0,4xD 150 0.03 0.04 0.055 0.065 0.085 0.1 0.11
K.2 | Cast iron > 240 HB 1,5xD 0,4xD 110 0.03 0.04 0.055 0.065 0.085 0.1 0.11
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 1,5xD 0,4xD 50 0.03 0.04 0.055 0.065 0.085 0.1 0.11
H.1 | Hardened materials < 54 HRC 1,5xD 0,4xD 120 0.03 0.04 0.055 0.065 0.085 0.1 0.11
H.2 | Hardened materials 54 - 60 HRC 1,5xD 0,4xD 100 0.03 0.04 0.055 0.065 0.085 0.1 0.11

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Type HR

Type HR

more +
For roughing operation and materials of medium and higher strength (up to 1200 MPa), surface roughness Ra 6,3 and more.
Feed direction possibility

Feed direction possibility

Solid carbide

Solid carbide

Air cooling

Air cooling

Company norm

Company norm

Tool geometry

Tool geometry

more +
Helix angle = 45°. Rake angle = 6°.
End face design

End face design

AlCrN coating

AlCrN coating

more +
Coating with very high wear resistance and excellent hot hardness.