End mills long, 2 teeth cut to centre, 35°-38°, type N, plain shank, coating AlCrN
h 10
h 6
l1 l2 Dn Z lnItem codeOn stock
365782,8414S141602N.030 Yes
3,5657103,3416S141602N.035 No
4657113,8416S141602N.040 Yes
4,5657114,3418S141602N.045 No
5657134,8418S141602N.050 No
6657135,7419S141602N.060 Yes
8863197,8425S141602N.080 Yes
101072229,5430S141602N.100 Yes
1212832611,5436S141602N.120 No
1414832613,5436S141602N.140 No
1616923215,5442S141602N.160 No
1818923217,5442S141602N.180 Yes
20201043819,5452S141602N.200 Yes

Cutting conditions





Ø 3

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²1,5xD0,3xD2100.0150.
P.3 | Tool steels low alloyed≤ 1100 N/mm²1,5xD0,3xD1750.0150.
P.5 | Tool steels high alloyed≤ 1100 N/mm²1,5xD0,3xD1200.0150.
M.1 | Corrosion- and acid-proof steels≤ 750 N/mm²1,5xD0,3xD1100.0150.
M.2 | Corrosion- and acid-proof steels750 - 850 N/mm²1,5xD0,3xD900.0150.
K.1 | Cast iron≤ 820 N/mm²1,5xD0,3xD1500.0150.
K.2 | Cast iron> 800 N/mm²1,5xD0,3xD1100.0150.
S.1 | Chrome-nickel alloys≤ 1500 N/mm²1,5xD0,3xD500.0150.
S.1 | Titanium, titanium alloys≤ 1250 N/mm²1,5xD0,3xD700.0150.
H.1 | Hardened materials≤ 1920 N/mm²1,5xD0,3xD1200.0150.
H.2 | Hardened materials1920 - 2210 N/mm²1,5xD0,3xD1000.0150.

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Plain straight shank according to DIN 6535 HA.
Tool geometry

Tool geometry

more +
Helix angle = 35/38°. Rake angle = 10°.
End face design

End face design

AlCrN coating

AlCrN coating

more +
Coating with very high wear resistance and excellent hot hardness.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

Solid carbide

Solid carbide

Air cooling

Air cooling