End mills long, 2 teeth cut to centre, 20°, type HR, plain shank, coating AlTiN
D
h 10
d
h 6
l1 l2 Z Item codeOn stock
6657133S109602.060 Yes
8863193S109602.080 Yes
101072224S109602.100 Yes
121283264S109602.120 Yes
141483264S109602.140 Yes
161692324S109602.160 Yes
181892324S109602.180 Yes
2020104384S109602.200 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²1xD0,4xD1800.0150.020.0250.030.040.0450.05
P.3 | Tool steels low alloyed≤ 1100 N/mm²1xD0,4xD1000.0150.020.0250.030.040.0450.05
P.5 | Tool steels high alloyed≤ 1100 N/mm²1xD0,4xD800.0150.020.0250.030.040.0450.05
K.1 | Cast iron< 240 HB1xD0,4xD1400.0150.020.0250.030.040.0450.05
K.2 | Cast iron> 240 HB1xD0,4xD1000.0150.020.0250.030.040.0450.05
S.1 | Chrome-nickel alloys≤ 1500 N/mm²1xD0,4xD500.0150.020.0250.030.040.0450.05
S.2 | Titanium, titanium alloys≤ 1250 N/mm²1xD0,4xD700.0150.020.0250.030.040.0450.05

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Plain straight shank according to DIN 6535 HA.
Tool geometry

Tool geometry

more +
Helix angle = 20°. Rake angle = 8°.
End face design

End face design

Coating AlTiN

Coating AlTiN

more +
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.
Type HR

Type HR

more +
For roughing operation and materials of medium and higher strength (up to 1200 MPa), surface roughness Ra 6,3 and more.
Feed direction possibility

Feed direction possibility

Solid carbide

Solid carbide

Oil coolant.

Oil coolant.