End mills extra long, fine teeth, 50°-35°, type H, Weldon shank
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 20 |
---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 2xD | 0,06xD | 210 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 2xD | 0,06xD | 175 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 2xD | 0,06xD | 120 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
K.1 | Cast iron | < 240 HB | 2xD | 0,06xD | 150 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
K.2 | Cast iron | > 240 HB | 2xD | 0,06xD | 110 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 2xD | 0,06xD | 50 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
H.1 | Hardened materials | < 54 HRC | 2xD | 0,06xD | 120 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
H.2 | Hardened materials | 54 - 60 HRC | 2xD | 0,06xD | 100 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 |
Calculations of cutting conditions
Product attributes
Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.

Feed direction possibility

Oil coolant.
Coating with very high wear resistance and excellent hot hardness.