Solid carbide wiertłas with inner cooling 5xD, type W, coating ZrN, code S10132, diameter 3 mm
D | d | l1 | l2 | Item code | On stock |
---|---|---|---|---|---|
3 | 6 | 66 | 28 | S10132.030 ZrN | Yes |
Cutting conditions
Material |
Strength |
Vc |
fz(mm/r) Ø3 |
Ø5 |
Ø8 |
Ø10 |
Ø12 |
Ø15 |
Ø17 |
Ø20 |
---|---|---|---|---|---|---|---|---|---|---|
N.1 | Aluminium, Aluminium cast alloys Si (Si ≤ 6%) | ≤ 400 N/mm² | 260 | 0,14 | 0,14 | 0,2 | 0,28 | 0,35 | 0,35 | 0,45 | 0,45 |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 160 | 0,14 | 0,14 | 0,2 | 0,28 | 0,35 | 0,35 | 0,45 | 0,45 |
N.3 | Aluminium cast alloys Si ( Si > 12% ) | ≤ 600 N/mm² | 160 | 0,14 | 0,14 | 0,2 | 0,28 | 0,35 | 0,35 | 0,45 | 0,45 |
N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 800 N/mm² | 150 | 0,14 | 0,14 | 0,2 | 0,28 | 0,35 | 0,35 | 0,45 | 0,45 |
N.5 | Plastics | ≤ 300 N/mm² | 140 | 0,12 | 0,12 | 0,16 | 0,21 | 0,27 | 0,27 | 0,35 | 0,35 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 6535 HA.
![Point angle 140°](/r/2/62348/products/ikony-35/spicka_140.png)
Point angle 140°
![Right helix](/r/2/62350/products/ikony-35/pravorezny.png)
Right helix
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
For machining of soft materials, for example aluminium and non-ferrous metals.
![Drilling depth 5xD](/r/2/62344/products/ikony-35/delka_5xd.png)
Drilling depth 5xD
![With coolant holes](/r/2/62328/products/ikony-35/chlazeni_vnitrni.png)
With coolant holes
Coating with high corrosion resistance and high hardness with low coefficitent of friction. Ideal for machining aluminum alloys, cupper alloys or plastics.