330215 High-speed steel HSS Co5 DIN 1833 C
Clamping element
Tool geometry
Cutting edges on the face and perimeter of the angle cutter.
Feed direction possibility
Material HSS Co5
Dovetail milling cutters, Weldon shank
ϱ
±30'
D
js 16
d
h 6
l1 l2 Z Item code On stock
45 16 12 60 4 10 330215.045160 No
45 20 12 63 5 10 330215.045200 Yes
45 25 12 67 6,3 10 330215.045250 Yes
45 32 16 71 8 12 330215.045320 Yes
45 40 16 80 10 12 330215.045400 Yes
50 16 12 60 5 10 330215.050160 Yes
50 20 12 63 6,3 10 330215.050200 Yes
50 25 12 67 8 10 330215.050250 Yes
55 16 12 60 5,6 10 330215.055160 Yes
55 20 12 63 7,1 10 330215.055200 Yes
55 25 12 67 9 10 330215.055250 Yes
60 16 12 60 6,3 10 330215.060160 Yes
60 20 12 63 8 10 330215.060200 Yes
60 25 12 67 10 10 330215.060250 Yes
60 32 16 71 12,5 10 330215.060320 Yes
60 40 16 80 16 12 330215.060400 Yes
65 16 12 60 6,3 12 330215.065160 Yes
65 25 12 67 10 10 330215.065250 Yes
70 16 12 60 7 12 330215.070160 Yes
70 20 12 63 9 10 330215.070200 Yes
70 25 16 67 11 10 330215.070250 Yes
75 16 12 60 8 10 330215.075160 Yes
75 25 12 67 10 12 330215.075250 Yes
80 16 12 60 8 10 330215.080160 Yes
80 25 12 67 10 12 330215.080250 Yes
85 16 12 60 8 10 330215.085160 Yes
85 25 12 67 10 12 330215.085250 Yes

ϱ ≧ 65 ≠ DIN 1833 C

Cutting conditions


Material

Strength

Ae

Vc
fz(mm/z)
Ø 16

Ø 20

Ø 25

Ø 32
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1xb 37.5 0.07 0.075 0.08 0.09
P.2 | General construction steels, steel castings ≤ 850 N/mm² 1xb 32.5 0.07 0.075 0.08 0.09
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1xb 18 0.07 0.075 0.08 0.09
S.2 | Titanium, Titanium alloys ≤ 1250 N/mm² 1xb 9 0.049 0.0525 0.056 0.063

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Cutting edges on the face and perimeter of the angle cutter.

Cutting edges on the face and perimeter of the angle cutter.

Material HSS Co5

Material HSS Co5

more +
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Tool geometry

Tool geometry

more +
Helix angle = 0°. Rake angle = 0°.
Feed direction possibility

Feed direction possibility