230418 TiAlNHigh-speed steel HSS Co8DIN 327K
Clamping element
Type N
Tool geometry
Feed direction possibility
Material HSS Co8
TiAlN coating.
Slot drills short, 3-fluted, centre cutting, 30°, type N, Weldon shank, coating TiAlN
D
e 8
d
h 6
l1 l2 Z Item codeOn stock
264843 230418.020 TiAlN Yes
2,864953 230418.028 TiAlN No
364953 230418.030 TiAlN Yes
3,565063 230418.035 TiAlN Yes
3,865173 230418.038 TiAlN No
465173 230418.040 TiAlN Yes
4,565173 230418.045 TiAlN Yes
4,865283 230418.048 TiAlN No
565283 230418.050 TiAlN No
5,565283 230418.055 TiAlN Yes
5,7565283 230418.0575 TiAlN No
665283 230418.060 TiAlN Yes
6,51060103 230418.065 TiAlN Yes
71060103 230418.070 TiAlN Yes
7,51060103 230418.075 TiAlN Yes
7,751061113 230418.0775 TiAlN No
81061113 230418.080 TiAlN Yes
91091113 230418.090 TiAlN Yes
9,51061113 230418.095 TiAlN Yes
9,71063133 230418.097 TiAlN No
101063133 230418.100 TiAlN Yes
111270133 230418.110 TiAlN Yes
121273163 230418.120 TiAlN Yes
131273163 230418.130 TiAlN Yes
141273163 230418.140 TiAlN Yes
151273163 230418.150 TiAlN Yes
161279193 230418.160 TiAlN Yes
181679193 230418.180 TiAlN No
19,72088223 230418.197 TiAlN Yes
201688223 230418.200 TiAlN Yes
222088223 230418.220 TiAlN Yes
2525102263 230418.250 TiAlN Yes
2825102263 230418.280 TiAlN Yes
3025102263 230418.300 TiAlN No
3232112323 230418.320 TiAlN No

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 3

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20

Ø 25

Ø 32
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²0,5xD1xD67.50.0090.0220.0290.0360.0440.0580.0650.0730.0910.116
P.2 | General construction steels, steel castings≤ 850 N/mm²0,5xD1xD58.50.0090.0220.0290.0360.0440.0580.0650.0730.0910.116
P.3 | Tool steels low alloyed≤ 1100 N/mm²0,5xD1xD360.0090.0220.0290.0360.0440.0580.0650.0730.0910.116
P.4 | Heat treatable steels≤ 900 N/mm²0,5xD1xD450.0090.0220.0290.0360.0440.0580.0650.0730.0910.116
M.2 | Corrosion- and acid-proof steels750 - 850 N/mm²0,5xD1xD22.50.0090.0220.0290.0360.0440.0580.0650.0730.0910.116
K.1 | Cast iron (≤ 240 HB)≤ 820 N/mm²0,5xD1xD52.50.0090.0220.0290.0360.0440.0580.0650.0730.0910.116
K.2 | Cast iron (> 240 HB)> 800 N/mm²0,5xD1xD37.50.0090.0220.0290.0360.0440.0580.0650.0730.0910.116
N.2 | Aluminium cast alloys Si (Si ≤ 12%)≤ 600 N/mm²0,5xD1xD240-4500.01170.02860.03770.04680.05720.07540.08450.09490.11830.1508
N.4 | Copper–zinc alloys, copper–tin alloys≤ 800 N/mm²0,5xD1xD120-1800.0090.0220.0290.0360.0440.0580.0650.0730.0910.116
S.2 | Titanium, Titanium alloys≤ 1250 N/mm²0,5xD1xD180.00630.01540.02030.02520.03080.04060.04550.05110.06370.0812

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Tool geometry

Tool geometry

more +
Helix angle = 30°. Rake angle = 12°.
Material HSS Co8

Material HSS Co8

more +
Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

TiAlN coating.

TiAlN coating.

more +
Its advantage is in high hardness in higher temperaures, good oxidation resistance and low temperature conductivity. Universal usage with emphasis on high-speed miling without cooling. Siutable for milling of hard materials.