121517 High-speed steel HSSE-PM DIN 844L
Clamping element
Type N
Tool geometry
Feed direction possibility
Material HSSE-PM
Coating AlTiN
End mills long, 1 tooth cut over centre, type N, Weldon shank
D
k 10
d
h 6
l1 l2 Z Item code On stock
3 6 56 12 4 121517.030 Yes
6 6 68 24 4 121517.060 Yes
8 10 88 38 4 121517.080 Yes
10 10 95 45 4 121517.100 Yes
12 12 110 53 4 121517.120 Yes
14 12 110 53 4 121517.140 No
16 16 123 63 4 121517.160 Yes
18 16 123 63 4 121517.180 No
20 20 141 75 4 121517.200 Yes
32 32 186 106 6 121517.320 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.2 | General construction steels, steel castings ≤ 850 N/mm² 1xD 0,1xD 99 0.017 0.023 0.031 0.037 0.048 0.056 0.063
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1xD 0,1xD 61.5 0.017 0.023 0.031 0.037 0.048 0.056 0.063
P.4 | Heat treatable steels ≤ 900 N/mm² 1xD 0,1xD 76.5 0.017 0.023 0.031 0.037 0.048 0.056 0.063
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1xD 0,1xD 61.5 0.017 0.023 0.031 0.037 0.048 0.056 0.063
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1xD 0,1xD 37.5 0.017 0.023 0.031 0.037 0.048 0.056 0.063
K.1 | Cast iron < 240 HB 1xD 0,1xD 88.5 0.017 0.023 0.031 0.037 0.048 0.056 0.063
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 1xD 0,1xD 31.5 0.0119 0.0161 0.0217 0.0259 0.0336 0.0392 0.0441
S.2 | Titanium, Titanium alloys ≤ 1250 N/mm² 1xD 0,1xD 30 0.0119 0.0161 0.0217 0.0259 0.0336 0.0392 0.0441

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Tool geometry

Tool geometry

more +
Helix angle = 30°. Rake angle = 12°.
Material HSSE-PM

Material HSSE-PM

more +
Extra high performance high speed steel produced by powder metallurgy. It has a homogeneous structure resulting in higher dimension stability and longer tool life. It is applicable for machining of materials with very high strength and materials hard to machine, such as Titanium and its alloys. The milling cutters made from this material are delivered with AlTiN coating as a standard.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

Coating AlTiN

Coating AlTiN

more +
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.