End mills for stainless steel, 50°, type N, Weldon shank, coating AlTiN
150617SHigh-speed steel HSSE-PM
| D |
| d |
|l1||l2||l3||Z||Item code||On stock|
|P.1 | Free-cutting steels, general construction steels||≤ 600 N/mm²||1xD||0,1xD||78||0.2||0.027||0.038||0.044||0.054||0.065||0.078|
|P.2 | General construction steels, steel castings||≤ 850 N/mm²||1xD||0,1xD||78||0.2||0.027||0.038||0.044||0.054||0.065||0.078|
|P.3 | Tool steels low alloyed||≤ 1100 N/mm²||1xD||0,1xD||66||0.018||0.024||0.03||0.036||0.042||0.053||0.066|
|P.4 | Heat treatable steels||≤ 900 N/mm²||1xD||0,1xD||66||0.018||0.024||0.03||0.036||0.042||0.053||0.066|
|P.5 | Tool steels high alloyed||≤ 1100 N/mm²||1xD||0,1xD||66||0.018||0.024||0.03||0.036||0.042||0.053||0.066|
|P.6 | Tool and treated steels||> 1100 N/mm²||1xD||0,1xD||66||0.018||0.024||0.03||0.036||0.042||0.053||0.066|
|M.1 | Corrosion- and acid-proof steels||≤ 750 N/mm²||1xD||0,1xD||60||0.018||0.024||0.03||0.036||0.042||0.054||0.068|
|M.2 | Corrosion- and acid-proof steels||750 - 850 N/mm²||1xD||0,1xD||48||0.018||0.024||0.03||0.036||0.042||0.054||0.068|
|M.3 | Corrosion- and acid-proof steels||> 850 mm²||1xD||0,1xD||48||0.018||0.024||0.03||0.036||0.042||0.054||0.068|
Calculations of cutting conditions
Clamping elementmore +
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Type Nmore +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility
Coating AlTiNmore +
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.
Tool geometrymore +
Helix angle = 50°. Rake angle = 12°.
Material HSSE-PMmore +
Extra high performance high speed steel produced by powder metallurgy. It has a homogeneous structure resulting in higher dimension stability and longer tool life. It is applicable for machining of materials with very high strength and materials hard to machine, such as Titanium and its alloys. The milling cutters made from this material are delivered with AlTiN coating as a standard.