Woodruff keyseat cutters, plain shank
|
D
h 11 |
S
e 8 |
d
h 8 | l1 | Z | Dj | Item code | On stock |
|---|---|---|---|---|---|---|---|
| 7,5 | 1,5 | 6 | 48 | 8 | 7 | 320100.070015 | Yes |
| 7,5 | 2 | 6 | 48 | 8 | 7 | 320100.070020 | Yes |
| 10,8 | 1 | 8 | 45 | 8 | 10 | 320100.100010 | Yes |
| 10,8 | 1,6 | 8 | 45 | 8 | 10 | 320100.100016 | Yes |
| 10,8 | 2,5 | 8 | 45 | 8 | 10 | 320100.100025 | Yes |
| 10,8 | 3 | 8 | 45 | 8 | 10 | 320100.100030 | Yes |
| 14 | 3 | 8 | 45 | 8 | 13 | 320100.130030 | Yes |
| 14 | 4 | 10 | 45 | 8 | 13 | 320100.130040 | Yes |
| 17,2 | 1,6 | 10 | 50 | 8 | 16 | 320100.160016 | Yes |
| 17,2 | 2 | 10 | 50 | 8 | 16 | 320100.160020 | Yes |
| 17,2 | 3 | 10 | 50 | 8 | 16 | 320100.160030 | No |
| 17,2 | 4 | 10 | 50 | 8 | 16 | 320100.160040 | Yes |
| 17,2 | 5 | 12 | 50 | 8 | 16 | 320100.160050 | Yes |
| 20,5 | 4 | 10 | 60 | 8 | 19 | 320100.190040 | Yes |
| 20,5 | 5 | 12 | 50 | 8 | 19 | 320100.190050 | Yes |
| 23,7 | 5 | 12 | 60 | 8 | 22 | 320100.220050 | Yes |
| 23,7 | 6 | 12 | 60 | 8 | 22 | 320100.220060 | Yes |
| 27 | 2 | 12 | 60 | 10 | 25 | 320100.250020 | Yes |
| 27 | 3 | 12 | 60 | 10 | 25 | 320100.250030 | Yes |
| 27 | 6 | 12 | 60 | 10 | 25 | 320100.250060 | Yes |
| 30,2 | 6 | 16 | 60 | 10 | 28 | 320100.280060 | Yes |
| 30,2 | 8 | 16 | 70 | 10 | 28 | 320100.280080 | Yes |
| 34,5 | 6 | 16 | 70 | 10 | 32 | 320100.320060 | Yes |
| 34,5 | 8 | 16 | 70 | 10 | 32 | 320100.320080 | Yes |
| 41 | 8 | 16 | 70 | 10 | 38 | 320100.380080 | Yes |
| 48,6 | 8 | 16 | 70 | 10 | 45 | 320100.450080 | Yes |
| 48,6 | 10 | 16 | 70 | 10 | 45 | 320100.450100 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 7.5 |
Ø 14 |
Ø 20.5 |
Ø 27 |
Ø 48.6 |
|---|---|---|---|---|---|---|---|---|---|
| P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 0,1xD | 1xb | 30 | 0.04 | 0.06 | 0.07 | 0.08 | 0.11 |
| P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 0,1xD | 1xb | 26 | 0.04 | 0.06 | 0.07 | 0.08 | 0.11 |
Product attributes
Plain straight shank according to DIN 1835 A.
Helix angle = 10°.
Rake angle = 10°.
Feed direction possibility
Norm ČSN 222185.
Cutting edges on the perimeter of the side and face cutter.
High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.