T-slot cutters, type N, plain shank



D
d 11 |
S
d 11 |
d
h 6 | l1 | Z | d1 | a | Item code | On stock |
---|---|---|---|---|---|---|---|---|
11 | 4 | 10 | 53,5 | 6 | 4 | 5 | 310205.110 | Yes |
12,5 | 6 | 10 | 57 | 6 | 5 | 6 | 310205.125 | No |
16 | 8 | 10 | 62 | 6 | 7 | 8 | 310205.160 | Yes |
18 | 8 | 12 | 70 | 6 | 8 | 10 | 310205.180 | Yes |
19 | 9 | 12 | 71 | 6 | 8 | 8 | 310205.190 | Yes |
21 | 9 | 12 | 74 | 6 | 10 | 12 | 310205.210 | No |
22 | 10 | 12 | 75 | 6 | 10 | 10 | 310205.220 | Yes |
25 | 11 | 16 | 82 | 8 | 12 | 14 | 310205.250 | No |
28 | 12 | 16 | 85 | 8 | 13 | 13 | 310205.280 | Yes |
36 | 16 | 25 | 103 | 8 | 17 | 17 | 310205.360 | Yes |
40 | 18 | 25 | 108 | 10 | 19 | 22 | 310205.400 | Yes |
45 | 20 | 25 | 113 | 10 | 21 | 21 | 310205.450 | Yes |
50 | 22 | 32 | 124 | 10 | 25 | 28 | 310205.500 | Yes |
60 | 28 | 32 | 139 | 10 | 30 | 36 | 310205.600 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 21 |
Ø 25 |
Ø 40 |
Ø 50 |
---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 0,1xD | 1xb | 30 | 0.07 | 0.08 | 0.04 | 0.05 |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 0,1xD | 1xb | 26 | 0.07 | 0.08 | 0.04 | 0.05 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 0,1xD | 1xb | 18 | 0.07 | 0.08 | 0.04 | 0.05 |
S.2 | Titanium, Titanium alloys | ≤ 1250 N/mm² | 0,1xD | 1xb | 9 | 0.049 | 0.056 | 0.028 | 0.035 |
Product attributes
Plain straight shank according to DIN 1835 A.
Helix angle = 10°.
Rake angle = 10°.

Feed direction possibility
Universal usage. Suitable for materials up to strength 900 MPa.

Cutting edges on the face and perimeter of the side and face cutter
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.