Corner rounding concave cutters, type N, Weldon shank
| R | Dc |
d
h 6 | l1 | Z | Item code | On stock |
|---|---|---|---|---|---|---|
| 0,5 | 5 | 6 | 57 | 4 | S360002.005 AlTiN | Yes |
| 1 | 4 | 6 | 57 | 4 | S360002.010 AlTiN | Yes |
| 1,5 | 5 | 8 | 63 | 4 | S360002.015 AlTiN | Yes |
| 2 | 4 | 8 | 63 | 4 | S360002.020 AlTiN | Yes |
| 2,5 | 5 | 10 | 72 | 4 | S360002.025 AlTiN | Yes |
| 3 | 4 | 10 | 72 | 4 | S360002.030 AlTiN | Yes |
| 3,5 | 5 | 12 | 83 | 4 | S360002.035 AlTiN | Yes |
| 4 | 4 | 12 | 83 | 4 | S360002.040 AlTiN | Yes |
| 5 | 4 | 14 | 83 | 4 | S360002.050 AlTiN | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz (mm/z) R 0,5 |
R 1 |
R 1,5 |
R 2 |
R 2,5 |
R 3 |
R 3,5 |
R 4 |
R 4,5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 1xR | 1xR | 180 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
| P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 1xR | 1xR | 100 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
| P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 1xR | 1xR | 80 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
| M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² | 1xR | 1xR | 90 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
| M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 1xR | 1xR | 80 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
| K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 1xR | 1xR | 140 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
| K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 1xR | 1xR | 100 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
| S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 1xR | 1xR | 50 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
| S.2 | Titanium, titanium alloys | ≤ 1250 N/mm² | 1xR | 1xR | 70 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
| H.1 | Hardened materials (< 54 HRC) | ≤ 1920 N/mm² | 1xR | 1xR | 60 | 0.05 | 0.6 | 0.6 | 0.7 | 0.8 | 0.9 | 0.1 | 0.12 | 0.14 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 6535 HA.
Universal usage. Suitable for materials up to strength 900 MPa.
End face design - radius
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Company norm
Feed direction possibility
Oil coolant.
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.