VK10010 SET High-speed steel HSS DIN 345
Type N
Tool geometry
Point shape - form A
Point angle 118°
Drilling depth 5xD
Right helix
Material HSS
Steamtempered (Black finish)
Item code On stock
VK10010.01 SET Yes

Content of set

Item code D MK l1 l2
VK10010.1500 15 2 212 114
VK10010.1600 16 2 218 120
VK10010.1800 18 2 228 130
VK10010.2000 20 2 238 140
VK10010.2200 22 2 248 155
VK10010.2400 24 3 281 160
VK10010.2600 26 3 286 165
VK10010.2800 28 3 291 170
VK10010.3000 30 3 296 175

Cutting conditions


Material

Strength

Vc
fz(mm/r)
Ø1

Ø2

Ø3,15

Ø4

Ø5

Ø6,3

Ø8

Ø10

Ø12,5
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 30 0,018 0,063 0,1 0,125 0,125 0,16 0,2 0,25 0,25
P.2 | General construction steels, steel castings ≤ 850 N/mm² 30 0,016 0,05 0,08 0,1 0,1 0,125 0,16 0,2 0,2
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 30 0,018 0,063 0,1 0,125 0,125 0,16 0,2 0,25 0,25
K.2 | Cast iron (> 240 HB) > 800 N/mm² 25 0,018 0,063 0,1 0,125 0,125 0,16 0,2 0,25 0,25
N.2 | Aluminium cast alloys Si (Si ≤ 12%) ≤ 600 N/mm² 70 0,02 0,08 0,125 0,16 0,16 0,2 0,25 0,315 0,315
N.3 | Aluminium cast alloys Si (Si > 12%) ≤ 600 N/mm² 70 0,018 0,063 0,1 0,125 0,125 0,16 0,2 0,25 0,25
N.4 | Cooper-zinc alloys, cooper-tin alloys ≤ 800 N/mm² 30 0,014 0,04 0,063 0,08 0,08 0,1 0,125 0,16 0,16

Calculations of cutting conditions

Product attributes

Type N

Type N

more +
Normal profile of flute, normal core, point angle 118°. Drills made of HSS Co mildly strenghtened core, point angle 130°.
Point shape - form A

Point shape - form A

more +
Conical lip relief, split point, DIN 1412 form A
Drilling depth 5xD

Drilling depth 5xD

Material HSS

Material HSS

more +
High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.
Tool geometry

Tool geometry

more +
Lead of helix 25° - 30°.
Point angle 118°

Point angle 118°

Right helix

Right helix

Steamtempered (Black finish)

Steamtempered (Black finish)

more +
Steamtempered (Black finish) is a process where a layer of iron oxide is formed on the surface of the tool. This layer increases the abrasion resistance of the blade, increases corrosion resistance and improves lubrication of the tool. The most effective use is for drill bits and taps.