Parallel shank twist drills - jobber series, type T100



D | l1 | l2 | Item code | On stock |
---|---|---|---|---|
1 | 34 | 12 | VN10045.0100 | Yes |
1,5 | 40 | 18 | VN10045.0150 | Yes |
2 | 49 | 24 | VN10045.0200 | Yes |
2,5 | 57 | 30 | VN10045.0250 | Yes |
3 | 61 | 33 | VN10045.0300 | Yes |
3,3 | 65 | 36 | VN10045.0330 | Yes |
3,5 | 70 | 39 | VN10045.0350 | Yes |
4 | 75 | 43 | VN10045.0400 | Yes |
4,2 | 75 | 43 | VN10045.0420 | Yes |
4,5 | 80 | 47 | VN10045.0450 | Yes |
5 | 86 | 52 | VN10045.0500 | Yes |
5,5 | 93 | 52 | VN10045.0550 | Yes |
6 | 93 | 57 | VN10045.0600 | Yes |
6,5 | 101 | 63 | VN10045.0650 | Yes |
6,8 | 109 | 69 | VN10045.0680 | Yes |
7 | 109 | 69 | VN10045.0700 | Yes |
7,5 | 109 | 69 | VN10045.0750 | Yes |
8 | 117 | 75 | VN10045.0800 | Yes |
8,5 | 117 | 75 | VN10045.0850 | Yes |
9 | 125 | 81 | VN10045.0900 | Yes |
9,5 | 125 | 81 | VN10045.0950 | Yes |
10 | 133 | 87 | VN10045.1000 | Yes |
10,2 | 133 | 87 | VN10045.1020 | Yes |
10,5 | 133 | 87 | VN10045.1050 | Yes |
11 | 142 | 94 | VN10045.1100 | Yes |
11,5 | 142 | 94 | VN10045.1150 | Yes |
12 | 151 | 101 | VN10045.1200 | Yes |
12,5 | 151 | 101 | VN10045.1250 | Yes |
13 | 151 | 101 | VN10045.1300 | Yes |
Cutting conditions
Material | Strength |
---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² |
P.4 | Heat treatable steels | ≤ 1100 N/mm² |
P.5 | Tool steels high alloyed | ≤ 1100 N/mm² |
P.6 | Tool and treated steelsi | > 1100 N/mm² |
M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² |
M.3 | Corrosion- and acid-proof steels | > 850 N/mm² |
K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² |
K.2 | Cast iron (> 240 HB) | > 800 N/mm² |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² |
N.3 | Aluminium cast alloys Si (Si > 12%) | ≤ 600 N/mm² |
N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 800 N/mm² |
N.5 | Plastics | < 300 N/mm² |
Product attributes
Profile of fluete is wide rounded with rear edges, very thick core, point angle 135°.

Point angle 128°
