Parallel shank twist drills, extra long series,type T100


D | l1 | l2 | Item code | On stock |
---|---|---|---|---|
2 | 125 | 85 | VN60045.0200 | No |
2,2 | 135 | 90 | VN60045.0220 | No |
2,5 | 140 | 95 | VN60045.0250 | Yes |
2,8 | 150 | 100 | VN60045.0280 | Yes |
3 | 150 | 100 | VN60045.0300 | No |
3,2 | 155 | 105 | VN60045.0320 | Yes |
3,5 | 165 | 115 | VN60045.0350 | Yes |
4 | 175 | 120 | VN60045.0400 | Yes |
4,2 | 175 | 120 | VN60045.0420 | Yes |
4,5 | 185 | 125 | VN60045.0450 | Yes |
4,8 | 195 | 135 | VN60045.0480 | No |
5 | 195 | 135 | VN60045.0500 | No |
5,5 | 205 | 140 | VN60045.0550 | Yes |
5,8 | 205 | 140 | VN60045.0580 | Yes |
6 | 205 | 140 | VN60045.0600 | Yes |
6,5 | 215 | 150 | VN60045.0650 | Yes |
7 | 225 | 155 | VN60045.0700 | Yes |
7,5 | 225 | 155 | VN60045.0750 | Yes |
8 | 240 | 165 | VN60045.0800 | Yes |
8,5 | 240 | 165 | VN60045.0850 | Yes |
9 | 250 | 175 | VN60045.0900 | Yes |
10 | 265 | 185 | VN60045.1000 | Yes |
10,5 | 265 | 185 | VN60045.1050 | Yes |
11 | 280 | 195 | VN60045.1100 | Yes |
12 | 295 | 205 | VN60045.1200 | Yes |
Cutting conditions
Material | Strength |
---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² |
P.4 | Heat treatable steels | ≤ 900 N/mm² |
P.5 | Tool steels high alloyed | ≤ 1100 N/mm² |
P.6 | Tool and treated steels | > 1100 N/mm² |
M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² |
M.3 | Corrosion- and acid-proof steels | > 850 N/mm² |
K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² |
K.2 | Cast iron (> 240 HB) | > 800 N/mm² |
N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 800 N/mm² |
S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² |
S.2 | Titanium, Titanium alloys | ≤ 1250 N/mm² |
Product attributes
Profile of fluete is wide rounded with rear edges, very thick core, point angle 135°.
Conical lip relief, split point, DIN 1412 form C.
