Thread mill
Thread | D | S |
d
h 5 | l1 | l2 | Dn | Item code | On stock |
---|---|---|---|---|---|---|---|---|
M0,8 | 0,57 | 0,01 | 3 | 39 | 2,4 | 0,27 | S900002.008 | No |
M0,9 | 0,64 | 0,01 | 3 | 39 | 2,7 | 0,31 | S900002.009 | No |
M1 | 0,71 | 0,015 | 3 | 39 | 3 | 0,35 | S900002.010 | No |
M1,2 | 0,91 | 0,015 | 3 | 39 | 3,6 | 0,55 | S900002.012 | No |
M1,4 | 1,06 | 0,2 | 3 | 39 | 4,2 | 0,62 | S900002.014 | No |
M1,6 | 1,2 | 0,2 | 3 | 39 | 4,8 | 0,69 | S900002.016 | No |
M1,8 | 1,35 | 0,2 | 3 | 39 | 5,5 | 0,84 | S900002.018 | No |
M2 | 1,5 | 0,2 | 3 | 39 | 6 | 0,92 | S900002.020 | Yes |
M2,5 | 1,9 | 0,025 | 3 | 39 | 7 | 1,27 | S900002.025 | Yes |
M3 | 2,3 | 0,03 | 6 | 66 | 9 | 1,57 | S900002.030 | Yes |
M4 | 3,1 | 0,04 | 6 | 66 | 12 | 2,09 | S900002.040 | Yes |
M5 | 4 | 0,05 | 6 | 66 | 15 | 2,9 | S900002.050 | Yes |
M6 | 4,8 | 0,07 | 6 | 75 | 18 | 3,47 | S900002.060 | Yes |
M8 | 6,5 | 0,08 | 6 | 80 | 22 | 4,85 | S900002.080 | Yes |
M10 | 7,9 | 0,09 | 6 | 80 | 26 | 5,95 | S900002.100 | Yes |
Cutting conditions
Material |
Strength |
---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² |
P.4 | Heat treatable steels | ≤ 900 N/mm² |
P.5 | Tool steels high alloyed | ≤ 1100 N/mm² |
P.6 | Tool and treated steels | > 1100 N/mm² |
M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² |
M.3 | Corrosion- and acid-proof steels | > 850 N/mm² |
N.1 | Aluminium, Aluminium cast alloys Si (Si ≤ 6%) | ≤ 400 N/mm² |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² |
N.3 | Aluminium cast alloys Si (Si > 12%) | ≤ 600 N/mm² |
Calculations of cutting conditions
Product attributes
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.