Solid carbide drills with coolant holes, 12xD
D | d | l1 | l2 | Item code | On stock |
---|---|---|---|---|---|
3 | 6 | 92 | 54 | S60122.030 TiAlN | Yes |
3,5 | 6 | 92 | 54 | S60122.035 TiAlN | No |
4 | 6 | 102 | 64 | S60122.040 TiAlN | Yes |
4,5 | 6 | 102 | 64 | S60122.045 TiAlN | Yes |
5 | 6 | 118 | 78 | S60122.050 TiAlN | No |
5,5 | 6 | 118 | 78 | S60122.055 TiAlN | Yes |
6 | 6 | 118 | 78 | S60122.060 TiAlN | Yes |
6,5 | 8 | 146 | 108 | S60122.065 TiAlN | Yes |
7 | 8 | 146 | 108 | S60122.070 TiAlN | No |
7,5 | 8 | 146 | 108 | S60122.075 TiAlN | Yes |
8 | 8 | 146 | 108 | S60122.080 TiAlN | No |
8,5 | 10 | 162 | 120 | S60122.085 TiAlN | No |
9 | 10 | 162 | 120 | S60122.090 TiAlN | Yes |
9,5 | 10 | 162 | 120 | S60122.095 TiAlN | No |
10 | 10 | 162 | 120 | S60122.100 TiAlN | No |
10,5 | 12 | 204 | 156 | S60122.105 TiAlN | No |
11 | 12 | 204 | 156 | S60122.110 TiAlN | No |
11,5 | 12 | 204 | 156 | S60122.115 TiAlN | No |
12 | 12 | 204 | 156 | S60122.120 TiAlN | No |
13 | 14 | 230 | 182 | S60122.130 TiAlN | No |
14 | 14 | 230 | 182 | S60122.140 TiAlN | No |
15 | 16 | 260 | 208 | S60122.150 TiAlN | No |
16 | 16 | 260 | 208 | S60122.160 TiAlN | No |
Cutting conditions
Material |
Strength |
Vc |
fz(mm/r) Ø3 |
Ø5 |
Ø8 |
Ø10 |
Ø12 |
Ø15 |
Ø17 |
Ø20 |
---|---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 80 | 0,1 | 0,1 | 0,12 | 0,17 | 0,25 | 0,25 | 0,3 | 0,3 |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 75 | 0,1 | 0,1 | 0,12 | 0,17 | 0,25 | 0,25 | 0,3 | 0,3 |
M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² | 45 | 0,07 | 0,07 | 0,1 | 0,15 | 0,2 | 0,2 | 0,25 | 0,25 |
M.3 | Corrosion- and acid-proof steels | > 850 N/mm² | 30 | 0,05 | 0,05 | 0,07 | 0,1 | 0,15 | 0,15 | 0,2 | 0,2 |
K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 70 | 0,07 | 0,07 | 0,12 | 0,17 | 0,25 | 0,25 | 0,3 | 0,3 |
Product attributes
Plain straight shank according to DIN 6535 HA.
Normal profile of flute, normal core, point angle 118°. Drills made of HSS Co mildly strenghtened core, point angle 130°.

Point angle 135°

Right helix
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.

Company norm
Conical lip relief, DIN 1412 form N.

Drilling depth 12xD
