853275V High-speed steel HSS Co5 DIN 842
Clamping element
Type N
Tool geometry
Cutting edges on the face and perimeter of the angle cutter.
Material HSS Co5
ϱ
±20'
D
js 16
S
js 14
d
H 7
Z Item code On stock
45 40 12 10 14 853275V.045040 Yes
45 50 15 13 16 853275V.045050 Yes
45 63 18 16 16 853275V.045063 Yes
45 80 23 22 18 853275V.045080 Yes
45 100 30 27 20 853275V.045100 Yes
50 40 13 10 14 853275V.050040 Yes
50 50 16 13 16 853275V.050050 Yes
50 63 20 16 16 853275V.050063 Yes
50 80 25 22 18 853275V.050080 Yes
50 100 32 27 20 853275V.050100 Yes
60 40 13 10 14 853275V.060040 Yes
60 50 16 13 16 853275V.060050 Yes
60 63 20 16 16 853275V.060063 Yes
60 80 25 22 18 853275V.060080 Yes
60 100 32 27 20 853275V.060100 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 40

Ø 50

Ø 63

Ø 80

Ø 100
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 0,8xS 1xD 37.5 0.025 0.03 0.035 0.04 0.043
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 0,8xS 1xD 18 0.025 0.03 0.035 0.04 0.043
P.4 | Heat treatable steels ≤ 900 N/mm² 0,8xS 1xD 25 0.025 0.03 0.035 0.04 0.043
P.6 | Tool and treated steels > 1100 N/mm² 0,8xS 1xD 16 0.018 0.021 0.025 0.028 0.3
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 0,8xS 1xD 10 0.025 0.03 0.035 0.04 0.043
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 0,8xS 1xD 30 0.025 0.03 0.035 0.04 0.043
K.2 | Cast iron (> 240 HB) > 800 N/mm² 0,8xS 1xD 22 0.025 0.03 0.035 0.04 0.043
N.4 | Cooper-zinc alloys, cooper-tin alloys ≤ 800 N/mm² 0,8xS 1xD 60-100 0.025 0.03 0.035 0.04 0.043
S.2 | Titanium, Titanium alloys ≤ 1250 N/mm² 0,8xS 1xD 9 0.018 0.021 0.025 0.028 0.3

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight bore with standard keyway according to DIN 138.
Tool geometry

Tool geometry

more +
Helix angle = 0°. Rake angle = 2°.
Material HSS Co5

Material HSS Co5

more +
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Cutting edges on the face and perimeter of the angle cutter.

Cutting edges on the face and perimeter of the angle cutter.