Shell end mills, semicoarse teeth, type NR, coating TiAlN
D
js 16 |
d
H 7 | l1 | Z | Item code | On stock |
---|---|---|---|---|---|
40 | 16 | 32 | 8 | 624275.040 TiAlN | Yes |
50 | 22 | 36 | 8 | 624275.050 TiAlN | Yes |
63 | 27 | 40 | 8 | 624275.063 TiAlN | Yes |
80 | 27 | 45 | 8 | 624275.080 TiAlN | No |
100 | 32 | 50 | 12 | 624275.100 TiAlN | Yes |
Cutting conditions
Material |
Strength |
Ae |
Ap |
Vc |
fz(mm/z) Ø 40 |
Ø 50 |
Ø 63 |
Ø 80 |
Ø 100 |
---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 0,8xl1 | 0,75xD | 67.5 | 0.096 | 0.102 | 0.12 | 0.132 | 0.138 |
P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 0,8xl1 | 0,75xD | 58.5 | 0.096 | 0.102 | 0.12 | 0.132 | 0.138 |
P.4 | Heat treatable steels | ≤ 900 N/mm² | 0,8xl1 | 0,75xD | 45 | 0.096 | 0.102 | 0.12 | 0.132 | 0.138 |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 0,8xl1 | 0,75xD | 22.5 | 0.096 | 0.102 | 0.12 | 0.132 | 0.138 |
K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 0,8xl1 | 0,75xD | 37.5 | 0.096 | 0.102 | 0.12 | 0.132 | 0.138 |
Calculations of cutting conditions
Product attributes
Straight bore with standard keyway and driving slot according to DIN 138.
Helix angle = 30°.
Rake angle = 12°.
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
For roughing operation and materials of lower and medium strength (up to 700 MPa), surface roughness Ra 12,5 and more.

Feed direction possibility
Its advantage is in high hardness in higher temperaures, good oxidation resistance and low temperature conductivity. Universal usage with emphasis on high-speed miling without cooling. Siutable for milling of hard materials.