Set of end mills short, 1 tooth cut over centre, 30°, type N, Weldon shank, coating AlTiN
Item code | On stock |
---|---|
120517.6-20 AlTiN SET | No |
Content of set
120517.6-20 SET
Item code | D e 8 |
d h 6 |
l1 | l2 | Z |
120517.060 | 6 | 6 | 57 | 13 | 4 |
120517.080 | 8 | 10 | 69 | 19 | 4 |
120517.100 | 10 | 10 | 72 | 22 | 4 |
120517.120 | 12 | 12 | 83 | 26 | 4 |
120517.160 | 16 | 16 | 92 | 32 | 4 |
120517.200 | 20 | 20 | 104 | 38 | 4 |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 18 |
Ø 20 |
Ø 25 |
Ø 32 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 1xD | 0,1xD | 99 | 0.017 | 0.023 | 0.031 | 0.037 | 0.048 | 0.056 | 0.063 | 0.085 | 0.1001 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 1xD | 0,1xD | 61.5 | 0.017 | 0.023 | 0.031 | 0.037 | 0.048 | 0.056 | 0.063 | 0.085 | 0.1001 |
P.4 | Heat treatable steels | ≤ 900 N/mm² | 1xD | 0,1xD | 76.5 | 0.017 | 0.023 | 0.031 | 0.037 | 0.048 | 0.056 | 0.063 | 0.085 | 0.1001 |
P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 1xD | 0,1xD | 61.5 | 0.017 | 0.023 | 0.031 | 0.037 | 0.048 | 0.056 | 0.063 | 0.085 | 0.1001 |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 1xD | 0,1xD | 37.5 | 0.015 | 0.023 | 0.031 | 0.037 | 0.048 | 0.056 | 0.063 | 0.085 | 0.1001 |
K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 1xD | 0,1xD | 88.5 | 0.017 | 0.023 | 0.031 | 0.037 | 0.048 | 0.056 | 0.063 | 0.085 | 0.1001 |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1xD | 0,1xD | 240-450 | 0.0221 | 0.0299 | 0.0403 | 0.0481 | 0.0624 | 0.0728 | 0.0819 | 0.1103 | 0.1301 |
S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 1xD | 0,1xD | 31.5 | 0.0119 | 0.0161 | 0.0217 | 0.0259 | 0.0336 | 0.0392 | 0.0441 | 0.052 | 0.0701 |
S.2 | Titanium, Titanium alloys | ≤ 1250 N/mm² | 1xD | 0,1xD | 30 | 0.0119 | 0.0161 | 0.0217 | 0.0259 | 0.0336 | 0.0392 | 0.0441 | 0.052 | 0.0701 |
Calculations of cutting conditions
Product attributes
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Helix angle = 30°.
Rake angle = 12°.
Extra high performance high speed steel produced by powder metallurgy. It has a homogeneous structure resulting in higher dimension stability and longer tool life. It is applicable for machining of materials with very high strength and materials hard to machine, such as Titanium and its alloys. The milling cutters made from this material are delivered with AlTiN coating as a standard.
Universal usage. Suitable for materials up to strength 900 MPa.

Feed direction possibility
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.