Half circle milling cutters convex
R
k 11 |
D
js 16 |
S
s 10 |
d
H 7 | Z | Item code | On stock |
---|---|---|---|---|---|---|
1 | 50 | 2 | 16 | 16 | 810075V.010 | Yes |
1,25 | 50 | 2,5 | 16 | 16 | 810075V.0125 | No |
1,5 | 50 | 3 | 16 | 16 | 810075V.015 | Yes |
2 | 50 | 4 | 16 | 16 | 810075V.020 | Yes |
2,5 | 63 | 5 | 22 | 12 | 810075V.025 | Yes |
3 | 63 | 6 | 22 | 12 | 810075V.030 | Yes |
3,5 | 63 | 7 | 22 | 12 | 810075V.035 | Yes |
4 | 63 | 8 | 22 | 12 | 810075V.040 | Yes |
4,5 | 63 | 9 | 22 | 12 | 810075V.045 | Yes |
5 | 63 | 10 | 22 | 12 | 810075V.050 | Yes |
5,5 | 80 | 11 | 27 | 12 | 810075V.055 | Yes |
6 | 80 | 12 | 27 | 12 | 810075V.060 | Yes |
7 | 80 | 14 | 27 | 12 | 810075V.070 | Yes |
8 | 80 | 16 | 27 | 12 | 810075V.080 | Yes |
9 | 100 | 18 | 32 | 12 | 810075V.090 | Yes |
10 | 100 | 20 | 32 | 12 | 810075V.100 | Yes |
12 | 100 | 24 | 32 | 12 | 810075V.120 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 50 |
Ø 63 |
Ø 80 |
Ø 100 |
Ø 125 |
---|---|---|---|---|---|---|---|---|---|
P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 1xR | 1xS | 37.5 | 0.08 | 0.1 | 0.12 | 0.14 | 0.142 |
P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 1xR | 1xS | 18 | 0.08 | 0.1 | 0.12 | 0.14 | 0.142 |
P.4 | Heat treatable steels | ≤ 900 N/mm² | 1xR | 1xS | 25 | 0.08 | 0.1 | 0.12 | 0.14 | 0.142 |
P.6 | Tool and treated steels | > 1100 N/mm² | 1xR | 1xS | 16 | 0.056 | 0.07 | 0.084 | 0.098 | 0.099 |
M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 1xR | 1xS | 10 | 0.08 | 0.1 | 0.12 | 0.14 | 0.142 |
K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 1xR | 1xS | 30 | 0.08 | 0.1 | 0.12 | 0.14 | 0.142 |
K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 1xR | 1xS | 22 | 0.08 | 0.1 | 0.12 | 0.14 | 0.142 |
Calculations of cutting conditions