End mills short with corner radius, λ 30°, type H, plain shank, code S120702R, diameter 6 mm, corner radius 0,5 mm, coating TiSiN
| D | d | l1 | l2 | l3 | Dn | R | Z | Item code | On stock |
|---|---|---|---|---|---|---|---|---|---|
| 6 | 6 | 54 | 7 | 17 | 5,7 | 0,5 | 4 | S120702R.06005 TISIN | No |
Cutting conditions
Material |
Strenght |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 4 |
Ø 5 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| H.1 | Hardened steel (< 54 HRC) | ≤ 1920 N/mm² | 1xD | 1xD | 170 | 0.042 | 0.056 | 0.07 | 0.084 | 0.112 | 0.14 | 0.168 |
| H.2 | Hardened steel (54-60 HRC) | 1920-2210 N/mm² | 1xD | 1xD | 150 | 0.042 | 0.056 | 0.07 | 0.084 | 0.112 | 0.14 | 0.168 |
| H.3 | Hardened steel (> 60 HRC) | > 2210 N/mm² | 1xD | 1xD | 100 | 0.042 | 0.056 | 0.07 | 0.084 | 0.112 | 0.14 | 0.168 |
Product attributes
Plain straight shank according to DIN 6535 HA.
Helix angle = 30°.
Rake angle = 10°.
End face design - radius
Coating with excellent hardness, high heat and oxidation resistance.It is usually applied to high-speed cutting tools used on CNC machines for machining hardened steels from 50 to 65 HRC.
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
Feed direction possibility
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.