C120602 Solid carbide (SC)
Clamping element
Company norm
Type N
Tool geometry
Feed direction possibility
End face design
Oil coolant.
Solid carbide
D
h 10
d
h 6
l1 l2 Z Item code On stock
3 3 40 12 4 C120602.030 No
4 4 40 12 4 C120602.040 No
5 5 50 14 4 C120602.050 Yes
6 6 50 16 4 C120602.060 Yes
8 8 60 20 4 C120602.080 Yes
10 10 70 22 4 C120602.100 Yes
12 12 70 22 4 C120602.120 Yes
16 16 75 25 4 C120602.160 Yes
20 20 100 32 4 C120602.200 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 3

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 20
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1,75xD 0,2xD 130 0.007 0.014 0.019 0.023 0.028 0.037 0.047
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1,75xD 0,2xD 70 0.007 0.014 0.019 0.023 0.028 0.037 0.047
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1,75xD 0,2xD 60 0.007 0.014 0.019 0.023 0.028 0.037 0.047
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 1,75xD 0,2xD 65 0.007 0.014 0.019 0.023 0.028 0.037 0.047
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1,75xD 0,2xD 60 0.007 0.014 0.019 0.023 0.028 0.037 0.047
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 1,75xD 0,2xD 100 0.007 0.014 0.019 0.023 0.028 0.037 0.047
K.2 | Cast iron (> 240 HB) > 800 N/mm² 1,75xD 0,2xD 70 0.007 0.014 0.019 0.023 0.028 0.037 0.047
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 1,75xD 0,2xD 35 0.007 0.014 0.019 0.023 0.028 0.037 0.047
S.2 | Titanium, titanium alloys ≤ 1250 N/mm² 1,75xD 0,2xD 50 0.007 0.014 0.019 0.023 0.028 0.037 0.047

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Plain straight shank according to DIN 6535 HA.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

Oil coolant.

Oil coolant.

Company norm

Company norm

Tool geometry

Tool geometry

more +
Helix angle = 30°. Rake angle = 12°.
End face design

End face design

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.