S112402RC Solid carbide (SC)
Clamping element
Type W
Tool geometry
Feed direction possibility
End face design - radius
Oil coolant.
With coolant holes
Solid carbide
ta-C coating
D
e8
d l1 l2 l3 Dn R Z Item code On stock
6 6 62 7 24 5,4 0,1 3 S112402RC.060 Yes
8 8 68 9 30 7,2 0,1 3 S112402RC.080 Yes
10 10 80 11 38 9 0,1 3 S112402RC.100 Yes
12 12 93 13 46 11 0,2 3 S112402RC.120 Yes
14 14 93 15 46 13 0,2 3 S112402RC.140 Yes
16 16 108 17 58 15 0,2 3 S112402RC.160 Yes
18 18 108 19 59 17 0,2 3 S112402RC.180 Yes
20 20 126 21 74 19 0,2 3 S112402RC.200 Yes
25 25 150 26 92 24 0,2 3 S112402RC.250 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø3

Ø4

Ø5

Ø6

Ø8

Ø10

Ø12

Ø16

Ø20

Ø25
N.1 | Aluminium, Aluminium cast alloys Si (Si ≤ 6%) ≤ 400 N/mm² 0,3xD 1xD 400 0,039 0,052 0,065 0,078 0,104 0,13 0,156 0,208 0,26 0,325
N.2 | Aluminium cast alloys Si (Si ≤ 12%) ≤ 600 N/mm² 0,3xD 1xD 350 0,039 0,052 0,065 0,078 0,104 0,13 0,156 0,208 0,26 0,325
N.4 | Cooper-zinc alloys, cooper-tin alloys ≤ 800 N/mm² 0,3xD 1xD 350 0,039 0,052 0,065 0,078 0,104 0,13 0,156 0,208 0,26 0,325

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Plain straight shank according to DIN 6535 HA.
Tool geometry

Tool geometry

more +
Helix angle = 44-46°. Rake angle = 15°.
End face design - radius

End face design - radius

With coolant holes

With coolant holes

ta-C coating

ta-C coating

more +
ta-C coating is designed for machining non-ferrous metals, aluminium alloys with higher Si content, copper, brass, bronze and plastics. Due to its small thickness, very low coefficient of friction and low tendency to stick, ta-C coating is suitable for materials with a tendency to stick as it prevents build-up on cutting edges.
Type W

Type W

more +
For machining of soft materials, for example aluminium and non-ferrous metals.
Feed direction possibility

Feed direction possibility

Oil coolant.

Oil coolant.

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.