S119602N AlCrN Solid carbide (SC)
Clamping element
Company norm
Type HR
Tool geometry
Feed direction possibility
End face design
Air cooling
Solid carbide
AlCrN coating
D
h 10
d
h 6
l1 l2 l3 Dn Z Item code On stock
4 6 57 11 16 3,8 3 S119602N.040 AlCrN Yes
5 6 57 13 18 4,8 4 S119602N.050 AlCrN Yes
6 6 57 13 19 5,7 4 S119602N.060 AlCrN Yes
8 8 63 19 25 7,6 4 S119602N.080 AlCrN Yes
10 10 72 22 30 9,5 4 S119602N.100 AlCrN Yes
12 12 83 26 36 11,5 4 S119602N.120 AlCrN Yes
14 14 83 26 36 13,5 4 S119602N.140 AlCrN Yes
16 16 92 32 42 15,5 4 S119602N.160 AlCrN Yes
16 16 92 32 42 15,5 5 S119602N.160Z5 AlCrN Yes
18 18 92 32 42 17,5 5 S119602N.180 AlCrN No
20 20 104 38 52 19,5 5 S119602N.200 AlCrN Yes
20 20 104 38 52 19,5 6 S119602N.200Z6 AlCrN Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 4

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1,5xD 0,4xD 210 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1,5xD 0,4xD 175 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1,5xD 0,4xD 120 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 1,5xD 0,4xD 110 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1,5xD 0,4xD 90 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 1,5xD 0,4xD 150 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
K.2 | Cast iron (> 240 HB) > 800 N/mm² 1,5xD 0,4xD 110 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 1,5xD 0,4xD 50 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
S.2 | Titanium, titanium alloys ≤ 1250 N/mm² 1,5xD 0,4xD 70 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
H.1 | Hardened materials (< 54 HRC) ≤ 1920 N/mm² 1,5xD 0,4xD 120 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
H.2 | Hardened materials (54 - 60 HRC) 1920 - 2210 N/mm² 1,5xD 0,4xD 100 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Plain straight shank according to DIN 6535 HA.
Type HR

Type HR

more +
For roughing operation and materials of medium and higher strength (up to 1200 MPa), surface roughness Ra 6,3 and more.
Feed direction possibility

Feed direction possibility

Air cooling

Air cooling

AlCrN coating

AlCrN coating

more +
Coating with very high wear resistance and excellent hot hardness.
Company norm

Company norm

Tool geometry

Tool geometry

more +
Helix angle = 45°. Rake angle = 6°.
End face design

End face design

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.