S141612N Solid carbide (SC) DIN 6527L
Clamping element
Type N
Tool geometry
Feed direction possibility
End face design
Air cooling
Solid carbide
AlCrN coating
D
h 10
d
h 6
l1 l2 l3 Dn Z Item code On stock
3 6 57 8 14 2,8 4 S141612N.030 Yes
3,5 6 57 10 16 3,3 4 S141612N.035 Yes
4 6 57 11 16 3,8 4 S141612N.040 Yes
4,5 6 57 11 18 4,3 4 S141612N.045 No
5 6 57 13 18 4,8 4 S141612N.050 Yes
6 6 57 13 19 5,7 4 S141612N.060 Yes
8 8 63 19 25 7,8 4 S141612N.080 No
10 10 72 22 30 9,5 4 S141612N.100 Yes
12 12 83 26 36 11,5 4 S141612N.120 Yes
14 14 83 26 36 13,5 4 S141612N.140 Yes
16 16 92 32 42 15,5 4 S141612N.160 Yes
18 18 92 32 42 17,5 4 S141612N.180 Yes
20 20 104 38 52 19,5 4 S141612N.200 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 3

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1,5xD 0,3xD 210 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1,5xD 0,3xD 175 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1,5xD 0,3xD 120 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 1,5xD 0,3xD 110 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1,5xD 0,3xD 90 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 1,5xD 0,3xD 150 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
K.2 | Cast iron (> 240 HB) > 800 N/mm² 1,5xD 0,3xD 110 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 1,5xD 0,3xD 50 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
S.1 | Titanium, titanium alloys ≤ 1250 N/mm² 1,5xD 0,3xD 70 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
H.1 | Hardened materials (< 54 HRC) ≤ 1920 N/mm² 1,5xD 0,3xD 120 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1
H.2 | Hardened materials (54 - 60 HRC) 1920 - 2210 N/mm² 1,5xD 0,3xD 100 0.015 0.03 0.04 0.05 0.06 0.08 0.09 0.1

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Tool geometry

Tool geometry

more +
Helix angle = 35/38°. Rake angle = 10°.
End face design

End face design

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

Air cooling

Air cooling

AlCrN coating

AlCrN coating

more +
Coating with very high wear resistance and excellent hot hardness.