S141602R Solid carbide (SC) DIN 6527L
Clamping element
Type N
Tool geometry
Feed direction possibility
End face design - radius
Air cooling
Solid carbide
AlCrN coating
D
h 10
d
h 6
l1 l2 l3 Dn R Z Item code On stock
6 6 57 13 19 5,7 0,5 4 S141602R.06005 No
6 6 57 13 19 5,7 1 4 S141602R.06010 Yes
8 8 63 19 25 7,6 0,5 4 S141602R.08005 Yes
8 8 63 19 25 7,6 1 4 S141602R.08010 No
10 10 72 22 30 9,5 0,5 4 S141602R.10005 Yes
10 10 72 22 30 9,5 1 4 S141602R.10010 Yes
10 10 72 22 30 9,5 2 4 S141602R.10020 No
12 12 83 26 36 11,5 0,5 4 S141602R.12005 Yes
12 12 83 26 36 11,5 1 4 S141602R.12010 No
12 12 83 26 36 11,5 2 4 S141602R.12020 No
16 16 92 32 42 15,5 0,5 4 S141602R.16005 Yes
16 16 92 32 42 15,5 1 4 S141602R.16010 Yes
16 16 92 32 42 15,5 2 4 S141602R.16020 No

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 6

Ø 8

Ø 10

Ø 12

Ø 16
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1xD 0,3xD 210 0.015 0.015 0.02 0.02 0.025
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1xD 0,3xD 175 0.015 0.015 0.02 0.02 0.025
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1xD 0,3xD 120 0.015 0.015 0.02 0.02 0.025
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 1xD 0,3xD 110 0.015 0.015 0.02 0.02 0.025
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1xD 0,3xD 90 0.015 0.015 0.02 0.02 0.025
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 1xD 0,3xD 150 0.015 0.015 0.02 0.02 0.025
K.2 | Cast iron (> 240 HB) > 800 N/mm² 1xD 0,3xD 110 0.015 0.015 0.02 0.02 0.025
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 1xD 0,3xD 50 0.015 0.015 0.02 0.02 0.025
S.2 | Titanium, titanium alloys ≤ 1250 N/mm² 1xD 0,3xD 70 0.015 0.015 0.02 0.02 0.025
H.1 | Hardened materials (< 54 HRC) ≤ 1920 N/mm² 1xD 0,3xD 120 0.015 0.015 0.02 0.02 0.025
H.2 | Hardened materials (54 - 60 HRC) 1920  - 2210N/mm² 1xD 0,3xD 100 0.015 0.015 0.02 0.02 0.025

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Plain straight shank according to DIN 6535 HA.
Tool geometry

Tool geometry

more +
Helix angle = 35/38°. Rake angle = 10°.
End face design - radius

End face design - radius

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

Air cooling

Air cooling

AlCrN coating

AlCrN coating

more +
Coating with very high wear resistance and excellent hot hardness.