End mills long, 1 tooth cut over centre, 25°, type WR, plain shank
|
D
h 10 |
d
h 6 | l1 | l2 | Z | Item code | On stock |
|---|---|---|---|---|---|---|
| 6 | 6 | 57 | 13 | 3 | S115402.060 | Yes |
| 8 | 8 | 63 | 19 | 3 | S115402.080 | Yes |
| 10 | 10 | 72 | 22 | 3 | S115402.100 | Yes |
| 12 | 12 | 83 | 26 | 3 | S115402.120 | Yes |
| 14 | 14 | 83 | 26 | 3 | S115402.140 | Yes |
| 16 | 16 | 92 | 32 | 3 | S115402.160 | Yes |
| 18 | 18 | 92 | 32 | 3 | S115402.180 | No |
| 20 | 20 | 104 | 38 | 3 | S115402.200 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 18 |
Ø 20 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| N.1 | Aluminium, Aluminium cast alloys Si (Si ≤ 6%) | ≤ 400 N/mm² | 2xD | 0,4xD | 160 | 0.055 | 0.073 | 0.092 | 0.11 | 0.147 | 0.165 | 0.183 |
| N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 2xD | 0,4xD | 220 | 0.055 | 0.073 | 0.092 | 0.11 | 0.147 | 0.165 | 0.183 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 6535 HA.
For roughing operation and materials of lower and medium strenght.
Feed direction possibility
