Chamfer end mills, 90°, 60°, type N, Weldon shank
| α | Dc |
d
h 6 | l1 | Z | Item code | On stock |
|---|---|---|---|---|---|---|
| 60° | 1,2 | 6 | 57 | 4 | S350002.060012 AlTiN | Yes |
| 60° | 1,6 | 8 | 63 | 4 | S350002.060016 AlTiN | Yes |
| 60° | 2 | 10 | 72 | 4 | S350002.060020 AlTiN | Yes |
| 60° | 2,4 | 12 | 83 | 4 | S350002.060024 AlTiN | Yes |
| 90° | 1,2 | 6 | 57 | 4 | S350002.090012 AlTiN | Yes |
| 90° | 1,6 | 8 | 63 | 4 | S350002.090016 AlTiN | Yes |
| 90° | 2 | 10 | 72 | 4 | S350002.090020 AlTiN | Yes |
| 90° | 2,4 | 12 | 83 | 4 | S350002.090024 AlTiN | Yes |
Cutting conditions
Material |
Strength |
Vc |
fz(mm/z) ∅ 1,2 |
90° ∅ 1,6 |
∅ 2 |
∅ 2,4 |
fz(mm/z) ∅ 1,2 |
60° ∅ 1,6 |
∅ 2 |
∅ 2,4 |
|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 180 | 0.05 | 0.07 | 0.1 | 0.12 | 0.03 | 0.05 | 0.07 | 0.1 |
| P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 100 | 0.05 | 0.07 | 0.1 | 0.12 | 0.03 | 0.05 | 0.07 | 0.1 |
| P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 80 | 0.05 | 0.07 | 0.1 | 0.12 | 0.03 | 0.05 | 0.07 | 0.1 |
| M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² | 90 | 0.05 | 0.07 | 0.1 | 0.12 | 0.03 | 0.05 | 0.07 | 0.1 |
| M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 80 | 0.05 | 0.07 | 0.1 | 0.12 | 0.03 | 0.05 | 0.07 | 0.1 |
| K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 140 | 0.05 | 0.07 | 0.1 | 0.12 | 0.03 | 0.05 | 0.07 | 0.1 |
| K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 100 | 0.05 | 0.07 | 0.1 | 0.12 | 0.03 | 0.05 | 0.07 | 0.1 |
| S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 50 | 0.05 | 0.07 | 0.1 | 0.12 | 0.03 | 0.05 | 0.07 | 0.1 |
| H.1 | Hardened materials (< 54 HRC) | ≤ 1920 N/mm² | 60 | 0.05 | 0.07 | 0.1 | 0.12 | 0.03 | 0.05 | 0.07 | 0.1 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 6535 HA.
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility
End face design
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Company norm
Helix angle = 0°.
Rake angle = 0°.
End face design
Oil coolant.
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.