End mills long with corner radius, 44°-45°, type N, code S151502R, diameter 12 mm, corner radius 0,5 mm, coating AlCrN

Home
Catalogue
End mills long with corner radius, 44°-45°, type N, code S151502R, diameter 12 mm, corner radius 0,5 mm, coating AlCrN

S152502R.12005 AlCrN Solid carbide (SC)

Cutting conditions Product attributes

D e 8	d h 5	l₁	l₂	l₃	D_n	R	Z	Item code	On stock
12	12	93	13	46	11	0,5	4	S152502R.12005 AlCrN	No

Cutting conditions

Material	Strength	A_p	A_e	V_c	fz(mm/z) Ø 4	Ø 6	Ø 8	Ø 10	Ø 12	Ø 16
P.1 \| Free-cutting steels, general construction steels	≤ 600 N/mm²	1xD	0,2xD	210	0.2	0.03	0.04	0.05	0.06	0.08
P.3 \| Tool steels low alloyed	≤ 1100 N/mm²	1xD	0,2xD	175	0.2	0.03	0.04	0.05	0.06	0.08
P.5 \| Tool steels high alloyed	≤ 1100 N/mm²	1xD	0,2xD	120	0.2	0.03	0.04	0.05	0.06	0.08
M.1 \| Corrosion- and acid-proof steels	≤ 750 N/mm²	1xD	0,2xD	110	0.2	0.03	0.04	0.05	0.06	0.08
M.2 \| Corrosion- and acid-proof steels	750 - 850 N/mm²	1xD	0,2xD	90	0.2	0.03	0.04	0.05	0.06	0.08
K.1 \| Cast iron (≤ 240 HB)	≤ 820 N/mm²	1xD	0,2xD	150	0.2	0.03	0.04	0.05	0.06	0.08
K.2 \| Cast iron (> 240 HB)	> 800 N/mm²	1xD	0,2xD	110	0.2	0.03	0.04	0.05	0.06	0.08
S.1 \| Chrome-nickel alloys	≤ 1500 N/mm²	1xD	0,2xD	50	0.2	0.03	0.04	0.05	0.06	0.08
S.2 \| Titanium, titanium alloys	≤ 1250 N/mm²	1xD	0,2xD	70	0.2	0.03	0.04	0.05	0.06	0.08
H.1 \| Hardened materials (< 54 HRC)	≤ 1920 N/mm²	1xD	0,2xD	120	0.2	0.03	0.04	0.05	0.06	0.08
H.2 \| Hardened materials (54 - 60 HRC)	1920 - 2210 N/mm²	1xD	0,2xD	100	0.2	0.03	0.04	0.05	0.06	0.08

Calculations of cutting conditions

Product attributes

Clamping element

more +

Plain straight shank according to DIN 6535 HA.

Type N

more +

Universal usage. Suitable for materials up to strength 900 MPa.

Feed direction possibility

Oil coolant.

AlCrN coating

more +

Coating with very high wear resistance and excellent hot hardness.

Company norm

Tool geometry

more +

Helix angle = 44/45°. Rake angle = 10°.

End face design - radius

Solid carbide

more +

Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.